easygrid

EASYGRID

This WikiROMS article is currently under HEAVY construction. This message will be erased when active construction is finished (in 1 or 2 days). April 21, 2008

EASYGRID is a simple matlab script to make ROMS grids and initialization files. It is a austere grid-making alternative designed as a beginner's tool. Since most of EASYGRID is in one file (easygrid.m), it is easier to understand the steps required to generate a simple grid (i.e. useful as a learning or teaching tool) and also reduces the required steps to get the software up and running (i.e. downloading and compiling dependencies)... hence you can play with grid-making and ROMS-running earlier in the game.

This WikiROMS page is a tutorial, where I provide test bathymetry and coastline so you can play with EASYGRID. Also, this page is where I will post notes and updates.

Download EASYGRID

• Download EASYGRID here (I will add link a bit later...)
• Add the location where you placed EASYGRID to your Matlab search path.
• Dependencies: EASYGRID uses MEXNC, SNCTOOLS and a few scripts (spheric_dist.m , smth_bath.m , pcolorjw.m) from the ROMS Matlab tool-kit. For a tutorial on how to download/install dependencies, CLICK HERE.

Get bathymetry

EASYGRID needs a bathymetry .mat file containing 3 vectors (xbathy, ybathy and zbathy), where:

• xbathy = longitude
• ybathy = latitude
• zbathy = depth (positive, in meters... For more information about bathymetry for ROMS, click HERE)

NOTE: Vectors xbathy and ybathy are in decimal degrees.

There easiest way to get bathymetry data (that I know) is to use Rich Signell's read_srtm30plus.m Matlab script. Instant bathymetry in 1 line of Matlab code! Click HERE for instructions to get and use read_srtm30plus.m.

The most difficult way to get bathymetry data (that I know) is to scan a chart and then digitize it using your mouse and a digitizing software like Didger (sorry, I am not aware of any good digitizing free software).

For this tutorial, you should download this bathymetry file (I will add link soon). I created it by merging two bathymetry files... one high-resolution digitized from a chart and another coarser-resolution using read_srtm30plus.m

Getting coastline

In EASYGRID, the coastline is only used for plotting and it therefore not indispensable. However, a later step of mask editing (using editmask.m) requires a coastline file. For both, EASYGRID and editmask.m, the coastline should be in a .mat file and should contain 2 vectors named "lat" and "lon" (both in units of decimal degrees).

An easy way to get coastline data is at NOAA's Coastline Extractor. Remember to select Matlab as format option (not default). SEAGRID's WikiROMS page has excellent information on how to use the Coastline Extractor, and tools to correct and manipulate coastline data.

For this tutorial, you should download this coastline file (I will add link soon). I created it from the digitized chart I use to make the bathymetry file.

Making your grid

Set up USER SETTINGS

Before you run EASYGRID to create your ROMS grid, you need to edit EASYGRID's user settings, which is the first part of script (after the help lines). Beside each entry line there are detailed instructions. In fact, most of the "user-manual" for EASYGRID is included within itself. Therefore I will simply copy-paste below a snippet from EASYGRID's code that contains the USER SETTINGS/instructions section.

NOTE: The default settings in EASYGRID are for the Fjord test case, hence you can just run EASYGRID (after downloading the bathymetry and coastline files above) to generate the grid and initial-conditions files required for the Fjord test case tutorial.

%*******************************************************************************************************************************
% USER SETTINGS ****************************************************************************************************************
%*******************************************************************************************************************************
%
% Switches -------------------------
     save_grid = 1;   % Save GRID in a NetCDF file ( yes = 1; no = 0 )
     save_init = 1;   % Create (and save) INITIAL CONDITIONS (from grid) ( yes = 1; no = 0 )
 screen_output = 1;   % Displays (on the screen) many parameters that need to be copy-pasted in the ocean.in file ( yes = 1; no = 0 )
     plot_grid = 1;   % Plot grid ( yes = 1; no = 0 )
   smooth_grid = 1;   % Smooth bathymetry ( yes = 1; no = 0 ) using H. Arango's smth_bath.m , which applies a Shapiro filter to the bathymetry
%
% -------------------------------------------------------------------------
% GRID SETTINGS -----------------------------------------------------------
% -------------------------------------------------------------------------
%
% Geographical and Grid parameters --------
     lat =  44.8125;        % Latitude  (degrees) of the bottom-left corner of the grid.
     lon = -62.8855;        % Longitude (degrees) of the bottom-left corner of the grid. 
%
       X = 9100;            % Width of domain (meters)
       Y = 2550;            % Length of domain (meters)
rotangle = -43;             % Angle (degrees) to rotate the grid conterclock-wise
   resol = 30;              % Cell width and height (i.e. Resolution)in meters. Grid cells are forced to be (almost) square.
       N = 10;              % Number of vertical levels
%   
%     
% Bathymetry -------------- % Bathymetry for ROMS is measured positive downwards (zeros are not allowed) see: https://www.myroms.org/wiki/index.php/Grid_Generation#Bathymetry
                            % To allow variations in surface elevation (eg. tides) while keeping all depths positive,
                            % an arbitrary offset (see minh below) is added to the depth vector.
%    
      hh = nan;             % Analytical Depth (meters) used to create a uniform-depth grid. If using a bathymetry file, leave hh = nan;
    minh = 4;               % Arbitrary depth offset in meters (see above). minh should be a little more than the maximum expected tidal variation.
   Bathy = 'Test_bathy.mat';% Bathymetry file. If using the analytical depth above (i.e. hh ~= nan), then Bathy will not be used.
                            % The bathymetry file should be a .mat file containing 3 vectors (xbathy, ybathy and zbathy). where xbathy = Longitude, 
                            % ybathy = Latitude and zbathy = depth (positive, in meters). xbathy and ybathy are in decimal degrees See: http://en.wikipedia.org/wiki/Decimal_degrees
       %Bathymetry smoothing routine...  See "Switches section" (above) to turn this ON or OFF
       if smooth_grid == 1;
           order = 2;       % Order of Shapiro filter (2,4,8)... default: 2
            rlim = 0.35;    % Maximum r-factor allowed (0.35)... default: 0.35
           npass = 50;      % Maximum number of passes.......... default: 50
       end
%---------------------------------
%                      
%
% Coastline ----------------------
   Coast = load('Test_coast.mat'); % If there isn't a coastline file... comment-out this line: e.g. %Coast = load('test_coast.mat');
                                   % The coastline is only used for plotting. The coastline .mat file should contain 2 vectors named "lat" and "lon"
%                                    
%      
% -------------------------------------------------------------------------
% OUTPUT: File naming and NetCDF descriptors ------------------------------
% -------------------------------------------------------------------------
Grid_filename = 'Fjord';      % Filename for grid and initial conditions files (don't include extension). 
                              % "_grd.nc" is added to grid file and "_ini.nc" is added to initial conditions file
Descrip_grd   = 'Test grid';               %Description for grid .nc file
Descrip_ini   = 'Test initial conditions'; %Description for initial conditions .nc file
Author        = 'John Smith';
Computer      = 'My Computer';
%
% -------------------------------------------------------------------------
% INITIAL CONDITIONS ------------------------------------------------------
% -------------------------------------------------------------------------
if save_init == 1; % See "Switches section" (above) to turn this ON or OFF
    % Initial conditions will be constant throught the grid domain
    %--------------------------------------------------------------------------
    NH4          = 0.1;     % Ammonium concentration (millimole_NH4 meter-3)
    NO3          = 10;      % Nitrate concentration (millimole_N03 meter-3)
    chlorophyll1 = 0.3;     % Chlorophyll concentration in small phytoplankyon (milligrams_chlorophyll meter-3)
    chlorophyll2 = 0.3;     % Chlorophyll concentration in large phytoplankyon (milligrams_chlorophyll meter-3)
    detritus1    = 0.03;    % Small detritus concentration (millimole_nitrogen meter-3)
    detritus2    = 0.03;    % Large detritus concentration (millimole_nitrogen meter-3)
    detritusC1   = 1;       % Small detritus carbon concentration (millimole_carbon meter-3)
    detritusC2   = 0.2;     % Large detritus carbon concentration (millimole_carbon meter-3)
    phyto1       = 0.02;    % Small phytoplankton concentration (millimole_nitrogen meter-3)
    phyto2       = 0.02;    % Large phytoplankton concentration (millimole_nitrogen meter-3)
    phytoC1      = 0.2;     % Small phytoplankton carbon concentration (millimole_carbon meter-3)
    phytoC2      = 0.1;     % Small phytoplankton carbon concentration (millimole_carbon meter-3)
    salt         = 30;      % Salinity (PSU)
    temp         = 9;       % Potential temperature (Celsius)
    u            = 0;       % u-momentum component (meter second-1)
    ubar         = 0;       % Vertically integrated u-momentum component (meter second-1)
    v            = 0;       % v-momentum component (meter second-1)
    vbar         = 0;       % Vertically integrated v-momentum component (meter second-1)
    zeta         = 0;       % Free-surface (meters)
    zooplankton  = 0.01;    % Zooplankton concentration "millimole_nitrogen meter-3"
    zooplanktonC = 0.5;     % Zooplankton carbon concentration "millimole_carbon meter-3"
    %--------------------------------------------------------------------------
end
%
%
% 
%*******************************************************************************************************************************
% END OF USER SETTINGS *********************************************************************************************************
%*******************************************************************************************************************************

Geographical/Grid parameters

After you got the bathymetry and coastline of your study region, now it is time to place a grid on it... In the USER SETTINGS section, you have to specify lat lon X Y and rotangle. This is done in an iterative manner, where first you input your best-guesses, then you plot the grid. From the plot you can adjust your geographical/grid parameters... plot... adjust... plot... adjust... and so on.

You may want to turn off some switches (see below) to speed up the plotting process.

% Switches -------------------------
     save_grid = 0;   % Save GRID in a NetCDF file ( yes = 1; no = 0 )
     save_init = 0;   % Create (and save) INITIAL CONDITIONS (from grid) ( yes = 1; no = 0 )
 screen_output = 0;   % Displays (on the screen) many parameters that need to be copy-pasted in the ocean.in file ( yes = 1; no = 0 )
     plot_grid = 1;   % Plot grid ( yes = 1; no = 0 )
   smooth_grid = 0;   % Smooth bathymetry ( yes = 1; no = 0 ) using H. Arango's smth_bath.m , which applies a Shapiro filter to the bathymetry

Bathymetry smoothing

ROMS doesn't like rough bathymetry with abrupt changes in topography. Therefore, after you got your grid where you wanted it to be, the next step is to smooth the bathymetry. Turn ON the smooth_grid variable in the %Switches section. Usually simply enabling smoothing (with the default settings) will do a pretty good job. But if unsatisfied, you can iteratively tweak the parameters in the %Bathymetry somoothing section of the USER SETTINGS until obtaining the desired smoothness.

Initial Conditions

ROMS initial-conditions NetCDF files contain information on the spatial distribution of one (or multiple) variable(s) that ROMS uses at the START of the simulation. The value of each initialization variable is specified for each corresponding cell in the ROMS grid... hence, inside a typical initial-conditions file, there will be one three-dimensional matrix (matching grid dimensions) for each specified variable. EASYGRID can generate Initial-Conditions NetCDF files for ROMS, however, only in a rudimentary manner... the user can only choose a single value for each initial-condition variable... EASYGRID makes each initial-conditions variable constant over the entire grid domain. This may be only useful in some simple cases and to do "quick-tests".

To change the value of a initial-condition variable, simply go to the INITIAL CONDITIONS section in the USER SETTINGS and change the value of the variable of interest.

If you need to add another initial-condition variable... add in the INITIAL CONDITIONS section of the USER SETTINGS:

new_variable = 0; % Variable description (units)

and ADD to the end of the easygrid.m file (substitute the parts in red)

%--------------------------------------------------------------------------
       dims                    = { 'time'; 's_rho'; 'eta_rho'; 'xi_rho'};
       nc{ 'newvar'}           = ncdouble(dims);
       nc{ 'newvar'}(:,:,:)    = ones(N,Mp,Lp).* 'new_variable';
       nc{ 'newvar'}.time      = 'ocean_time' ;

Parameter output on screen

If screen_output is turned ON (in the USER SETTINGS sections), EASYGRID will output some parameters to screen. Make sure you write this numbers (Lm, MM, N and DT) since you will need to enter them in the ocean.in file prior to running ROMS.

|  COPY-PASTE the following parameters into your ocean.in file
|  ----------------------------------------------------------------------------------------------
|
|
|     Lm == 302         ! Number of I-direction INTERIOR RHO-points
|     Mm == 84         ! Number of J-direction INTERIOR RHO-points
|      N == 10          ! Number of vertical levels
|
|
|  Make sure the Baroclinic time-step (DT) in your ocean.in file is less than: 3.3882 seconds
|  ----------------------------------------------------------------------------------------------

Saving .nc files

Once you got your grid in place and your bathymetry smoothed and your initial-conditions adjusted... it is time to save the NetCDF files for ROMS. To do this, simply turn on ALL the Switches in the USER SETTING section and run EASYGRID. Besides the plot, this time it will also save the grid and initial conditions .nc files. EASYGRID will also output some parameters to screen. Make sure you write this numbers (Lm, MM, N and DT) since you will need to enter them in the ocean.in file prior to running ROMS.

Editing Masks

After you created your grid.nc file, you can edit the mask (i.e. changing land-pixes to sea-pixels and vice versa) using editmask.m which is a GUI script included in the ROMS Matlab tool-kit (inside the rmask directory).

The current version of editmask.m (from the ROMS toolkit) doesn't work for me. HERE (link will be added soon) is a link to a revised editmask.m version that works for me.

Masking Criteria

• Fill in (i.e. mask) 1-cell bays
• Fill in disconnected lakes
• Tiny islands apparently don't cause troubles.