cppdefs.h

From WikiROMS
Jump to navigationJump to search
cppdefs.h

Internal header file containing all the C-preprocessing options that defines a particular application. It is included at the top of every ROMS source file.

Options associated with momentum equations

The default horizontal and vertical advection is 4th-order centered. Use the splines vertical advection option is shallow, high vertical resolution applications.
UV_ADV use to activate advection terms
UV_COR use to activate Coriolis term
UV_C2ADVECTION use to activate 2nd-order centered advection
UV_C4ADVECTION use to activate 4th-order centered advection
UV_SADVECTION use to activate splines vertical advection
UV_VIS2 use to activate harmonic horizontal mixing
UV_VIS4 use to activate biharmonic horizontal mixing
UV_LOGDRAG use to activate logarithmic bottom friction
UV_LDRAG use to activate linear bottom friction
UV_QDRAG use to activate quadratic bottom friction
UV_PSOURCE use to activate point Sources/Sinks

Options associated with tracers equations

The default horizontal and vertical advection is 4th-order centered. Use the splines vertical advection option is shallow, high vertical resolution applications.
TS_A4HADVECTION use if 4th-order Akima horizontal advection
TS_C2HADVECTION use if 2nd-order centered horizontal advection
TS_C4HADVECTION use if 4th-order centered horizontal advection
TS_MPDATA use if recursive MPDATA 3D advection
TS_U3HADVECTION use if 3rd-order upstream horiz. advection
TS_A4VADVECTION use if 4th-order Akima vertical advection
TS_C2VADVECTION use if 2nd-order centered vertical advection
TS_C4VADVECTION use if 4th-order centered vertical advection
TS_SVADVECTION use if splines vertical advection
TS_DIF2 use to turn ON or OFF harmonic horizontal mixing
TS_DIF4 use to turn ON or OFF biharmonic horizontal mixing
TS_FIXED use if diagnostic run, no evolution of tracers
T_PASSIVE use if inert passive tracers (dyes, etc)
SALINITY use if having salinity
NONLIN_EOS use if using nonlinear equation of state
QCORRECTION use if net heat flux correction
SCORRECTION use if freshwater flux correction
SOLAR_SOURCE use if solar radiation source term
SRELAXATION use if salinity relaxation as a freshwater flux
TS_PSOURCE use to turn ON or OFF point Sources/Sinks

Options for pressure gradient algorithm

If no option is selected, the pressure gradient term is computed using standard density Jacobian algorithm. Notice that there are two quartic pressure Jacobian options. They differ on how the WENO reconciliation step is done and in the monotonicity constraining algorithms.
DJ_GRADPS use if splines density Jacobian (Shchepetkin, 2000)
PJ_GRADP use if finite volume Pressure Jacobian (Lin,1997)
PJ_GRADPQ2 use if quartic 2 Pressure Jacobian (Shchepetkin,2000)
PJ_GRADPQ4 use if quartic 4 Pressure Jacobian (Shchepetkin,2000)
WJ_GRADP use if weighted density Jacobian (Song,1998)
ATM_PRESS use to impose atmospheric pressure onto sea surface

Options for model coupling

SWAN_COUPLING use if two-way coupling to SWAN
WRF_COUPLING use if two-way coupling to WRF

Options for atmospheric boundary layer

It is possible to compute surface wind stress and surface net heat and freshwater fluxes form atmospheric fields using the bulk flux parameterization of Fairall et al. (1996). There are three ways to provide longwave radiation in the atmospheric boundary layer: (i) compute the net longwave radiation internally using the Berliand (1952) equation (LONGWAVE) as function of air temperature, sea surface temperature, relative humidity, and cloud fraction; (ii) provide (read) longwave downwelling radiation only and then add outgoing longwave radiation (LONGWAVE_OUT) as a function of the model sea surface temperature; and (iii) provide net longwave radiation (default).
BULK_FLUXES use if bulk fluxes computation
COOL_SKIN use if cool skin correction
LONGWAVE use if computing net longwave radiation
LONGWAVE_OUT use if computing ougoing longwave radiation
EMINUSP use if computing E-P

Options for wave roughness formulation in bulk fluxes

COARE_TAYLOR_YELLAND use Taylor and Yelland (2001) relation
COARE_OOST use Oost et al (2002) relation
DEEPWATER_WAVES use Deep water waves approximation

Options for shortwave radiation

The shortwave radiation can be computed using the global albedo equation with a cloud correction. Alternatively, input shortwave radiation data computed from averaged data (with snapshots greater or equal than 24 hours) can be modulated by the local diurnal cycle which is a function longitude, latitude and year day.
ALBEDO use if albedo equation for shortwave radiation
DIURNAL_SRFLUX use to impose shortwave radiation local diurnal cycle

Options for model configuration

SOLVE3D use if solving 3D primitive equations
CURVGRID use if curvilinear coordinates grid
MASKING use if land/sea masking
BODYFORCE use if applying stresses as a body force
PROFILE use if time profiling
AVERAGES use if writing out time-averaged data
AVERAGES_AKV use if writing out time-averaged AKv
AVERAGES_AKT use if writing out time-averaged AKt
AVERAGES_AKS use if writing out time-averaged AKs
AVERAGES_BEDLOAD use if writing out time-averaged bed load
AVERAGES_FLUXES use if writing out time-averaged fluxes
AVERAGES_NEARSHORE use if writing out time-averaged nearshore stresses
AVERAGES_QUADRATIC use if writing out quadratic terms
DIAGNOSTICS_BIO use if writing out biological diagnostics
DIAGNOSTICS_UV use if writing out momentum diagnostics
DIAGNOSTICS_TS use if writing out tracer diagnostics
ICESHELF use if including ice shelf cavities
SPHERICAL use if analytical spherical grid
SPLINES use to activate parabolic splines reconstruction of vertical derivatives
STATIONS use if writing out station data
STATIONS_CGRID use if extracting data at native C-grid

Options for Lagrangian drifters

FLOATS use to activate simulated Lagrangian drifters
FLOAT_VWALK use if vertical random walk

Options for analytical fields configuration

The model may be configured, initialized, and forced with analytical expressions. These analytical expressions are coded in several header files which are included in analytical.F. The analytical header files in the ROMS/Functionals sub-directory correspond to all the distributed idealized test cases. Another set of analytical header files templates are provided in the User/Functionals sub-directory.
ANA_BIOLOGY use if analytical biology initial conditions
ANA_BPFLUX use if analytical bottom passive tracers fluxes
ANA_BSFLUX use if analytical bottom salinity flux
ANA_BTFLUX use if analytical bottom temperature flux
ANA_CLOUD use if analytical cloud fraction
ANA_DIAG use if customized diagnostics
ANA_FSOBC use if analytical free-surface boundary conditions
ANA_GRID use if analytical model grid set-up
ANA_HUMIDITY use if analytical surface air humidity
ANA_INITIAL use if analytical initial conditions
ANA_M2CLIMA use if analytical 2D momentum climatology
ANA_M2OBC use if analytical 2D momentum boundary conditions
ANA_M3CLIMA use if analytical 3D momentum climatology
ANA_M3OBC use if analytical 3D momentum boundary conditions
ANA_MASK use if analytical Land/Sea masking
ANA_PAIR use if analytical surface air pressure
ANA_PASSIVE use if analytical initial conditions for inert tracers
ANA_PERTURB use if analytical perturbation of initial conditions
ANA_PSOURCE use if analytical point Sources/Sinks
ANA_RAIN use if analytical rain fall rate
ANA_SEDIMENT use if analytical sediment initial fields
ANA_SMFLUX use if analytical surface momentum stress
ANA_SPFLUX use if analytical surface passive tracers fluxes
ANA_SPINNING use if analytical time-varying rotation force
ANA_SRFLUX use if analytical surface shortwave radiation flux
ANA_SSFLUX use if analytical surface salinity flux
ANA_SSH use if analytical sea surface height
ANA_SSS use if analytical sea surface salinity
ANA_SST use if analytical SST and dQdSST
ANA_STFLUX use if analytical surface temperature flux
ANA_TAIR use if analytical surface air temperature
ANA_TCLIMA use if analytical tracers climatology
ANA_TOBC use if analytical tracers boundary conditions
ANA_VMIX use if analytical vertical mixing coefficients
ANA_WINDS use if analytical surface winds
ANA_WWAVE use if analytical wind induced waves

Options for horizontal mixing of momentum

VISC_GRID use to scale viscosity coefficient by grid size
MIX_S_UV use if mixing along constant S-surfaces
MIX_GEO_UV use if mixing along geopotential (constant Z) surfaces

Options for horizontal mixing of tracers

DIFF_GRID use to scale diffusion coefficients by grid size
MIX_S_TS use if mixing along constant S-surfaces
MIX_GEO_TS use if mixing along geopotential (constant depth) surfaces
MIX_ISO_TS use if mixing along epineutral (constant density) surfaces

Options for vertical mixing of momentum and tracers

There are several vertical mixing parameterizations in ROMS. Activate only one closure.
BVF_MIXING use if Brunt-Vaisala frequency mixing
GLS_MIXING use if Generic Length-Scale mixing
MY25_MIXING use if Mellor/Yamada Level-2.5 closure
LMD_MIXING use if Large et al. (1994) K-profile vertical parameterization

Options for the Generic Length-Scale closure

The Generic Length Scale (GLS) uses two prognostic equations for turbulent kinetic energy (TKE) and length scale (ψ) variables. The GLS may be configured as k-kl, k-ε k-ω by tuning several parameters in ocean.in, see Warner et al., 2005 for more details. The default horizontal advection is third-order upstream bias. The default vertical advection is 4th-order centered advection.
CANUTO_A use if Canuto A-stability function formulation
CANUTO_B use if Canuto B-stability function formulation
CHARNOK use if Charnok surface roughness from wind stress
CRAIG_BANNER use if Craig and Banner wave breaking surface flux
KANTHA_CLAYSON use if Kantha and Clayson stability function
K_C2ADVECTION use if 2nd-order centered advection
K_C4ADVECTION use if 4th-order centered advection
N2S2_HORAVG use if horizontal smoothing of buoyancy/shear
ZOS_HSIG use if surface roughness from wave amplitude
TKE_WAVEDISS use if wave breaking surface flux from wave amplitude

Options for the Mellor/Yamada level 2.5 closure

This is the original closure proposed by Mellor and Yamda (1982) and latter modified by Galperin et al. (1994). The default horizontal advection is third-order upstream bias. The default vertical advection is 4th-order centered advection.
N2S2_HORAVG use if horizontal smoothing of buoyancy/shear
KANTHA_CLAYSON use if Kantha and Clayson stability function
K_C2ADVECTION use if 2nd-order centered advection
K_C4ADVECTION use if 4th-order centered advection

Options for K-profile vertical mixing parameterization

LMD_BKPP use if bottom boundary layer KPP mixing
LMD_CONVEC use to add convective mixing due to shear instability
LMD_DDMIX use to add double-diffusive mixing
LMD_NONLOCAL use if nonlocal transport
LMD_RIMIX use to add diffusivity due to shear instability
LMD_SHAPIRO use if Shapiro filtering boundary layer depth
LMD_SKPP use if surface boundary layer KPP mixing

Options for Richardson number smoothing

Mostly all vertical mixing parameterization are based on the Richardson Number (buoyancy/shear ratio). This computation is usually noisy and requires some smoothing. Use the options below if SPLINES is not activated.
RI_HORAVG use if horizontal Richardson number smoothing
RI_VERAVG use if vertical Richardson number smoothing

Options for Meinte Blass bottom boundary layer closure

The Options MB_Z0BL and MB_Z0RIP should be activated concurrently.
MB_BBL use if Meinte Blaas BBL closure
MB_CALC_ZNOT use if computing bottom roughness internally
MB_CALC_UB use if computing bottom orbital velocity internally
MB_Z0BIO use if biogenic bedform roughness for ripples
MB_Z0BL use if bedload roughness for ripples
MB_Z0RIP use if bedform roughness for ripples

Options for Styles and Glenn (2000) bottom boundary layer closure

SG_BBL use if Styles and Glenn (2000) BBL closure
SG_CALC_ZNOT use if computing bottom roughness internally
SG_CALC_UB use if computing bottom orbital velocity internally
SG_LOGINT use if logarithmic interpolation of (Ur,Vr)

Options for the Sherwood/Signell/Warner bottom boundary layer closure

SSW_BBL use if Sherwood et al. BBL closure
SSW_CALC_ZNOT use if computing bottom roughness internally
SSW_LOGINT use if logarithmic interpolation of (Ur,Vr)
SSW_CALC_UB use if computing bottom orbital velocity internally
SSW_FORM_DRAG_COR use to activate form drag coefficient
SSW_Z0BIO use if biogenic bedform roughness from ripples
SSW_Z0BL use if bedload roughness for ripples
SSW_Z0RIP use if bedform roughness from ripples

Options to impose mass conservation at the open boundary

EAST_VOLCONS use if Eastern edge mass conservation enforcement
WEST_VOLCONS use if Western edge mass conservation enforcement
NORTH_VOLCONS use if Northern edge mass conservation enforcement
SOUTH_VOLCONS use if Southern edge mass conservation enforcement

Options for periodic boundary conditions

EW_PERIODIC use if East-West periodic boundaries
NS_PERIODIC use if North-South periodic boundaries

Options for closed boundary conditions

EASTERN_WALL use if Eastern edge, closed wall condition
WESTERN_WALL use if Western edge, closed wall condition
NORTHERN_WALL use if Northern edge, closed wall condition
SOUTHERN_WALL use if Southern edge, closed wall condition

Options for open boundary conditions

RADIATION_2D use if tangential phase speed in radiation conditions
SPONGE use if enhanced viscosity/diffusion areas

Options for eastern edge open boundary conditions

Select only one option for free-surface, 2D momentum, 3D momentum, and tracers. The turbulent kinetic energy (TKE) conditions are only activated for the Generic length scale or Mellor-Yamada 2.5 vertical mixing closures. If open boundary radiation conditions, an additional option can be activated at each boundary edge to include a passive (active) nudging term with weak (strong) values for outflow (inflow).
EAST_FSCHAPMAN use if free-surface Chapman condition
EAST_FSGRADIENT use if free-surface gradient condition
EAST_FSRADIATION use if free-surface radiation condition
EAST_FSNUDGING use if free-surface passive/active nudging term
EAST_FSCLAMPED use if free-surface clamped condition
EAST_M2FLATHER use if 2D momentum Flather condition
EAST_M2GRADIENT use if 2D momentum gradient condition
EAST_M2RADIATION use if 2D momentum radiation condition
EAST_M2REDUCED use if 2D momentum reduced-physics
EAST_M2NUDGING use if 2D momentum passive/active nudging term
EAST_M2CLAMPED use if 2D momentum clamped condition
EAST_M3GRADIENT use if 3D momentum gradient condition
EAST_M3RADIATION use if 3D momentum radiation condition
EAST_M3NUDGING use if 3D momentum passive/active nudging term
EAST_M3CLAMPED use if 3D momentum clamped condition
EAST_KGRADIENT use if TKE fields gradient condition
EAST_KRADIATION use if TKE fields radiation condition
EAST_TGRADIENT use if tracers gradient condition
EAST_TRADIATION use if tracers radiation condition
EAST_TNUDGING use if tracers passive/active nudging term
EAST_TCLAMPED use if tracers clamped condition

Options for western edge open boundary conditions

Select only one option for free-surface, 2D momentum, 3D momentum, and tracers. The turbulent kinetic energy (TKE) conditions are only activated for the Generic length scale or Mellor-Yamada 2.5 vertical mixing closures. If open boundary radiation conditions, an additional option can be activated at each boundary edge to include a passive (active) nudging term with weak (strong) values for outflow (inflow).
WEST_FSCHAPMAN use if free-surface Chapman condition
WEST_FSGRADIENT use if free-surface gradient condition
WEST_FSRADIATION use if free-surface radiation condition
WEST_FSNUDGING use if free-surface passive/active nudging term
WEST_FSCLAMPED use if free-surface clamped condition
WEST_M2FLATHER use if 2D momentum Flather condition
WEST_M2GRADIENT use if 2D momentum gradient condition
WEST_M2RADIATION use if 2D momentum radiation condition
WEST_M2REDUCED use if 2D momentum reduced-physics
WEST_M2NUDGING use if 2D momentum passive/active nudging term
WEST_M2CLAMPED use if 2D momentum clamped condition
WEST_M3GRADIENT use if 3D momentum gradient condition
WEST_M3RADIATION use if 3D momentum radiation condition
WEST_M3NUDGING use if 3D momentum passive/active nudging term
WEST_M3CLAMPED use if 3D momentum clamped condition
WEST_KGRADIENT use if TKE fields gradient condition
WEST_KRADIATION use if TKE fields radiation condition
WEST_TGRADIENT use if tracers gradient condition
WEST_TRADIATION use if tracers radiation condition
WEST_TNUDGING use if tracers passive/active nudging term
WEST_TCLAMPED use if tracers clamped condition

Options for northern edge open boundary conditions

Select only one option for free-surface, 2D momentum, 3D momentum, and tracers. The turbulent kinetic energy (TKE) conditions are only activated for the Generic length scale or Mellor-Yamada 2.5 vertical mixing closures. If open boundary radiation conditions, an additional option can be activated at each boundary edge to include a passive (active) nudging term with weak (strong) values for outflow (inflow).
NORTH_FSCHAPMAN use if free-surface Chapman condition
NORTH_FSGRADIENT use if free-surface gradient condition
NORTH_FSRADIATION use if free-surface radiation condition
NORTH_FSNUDGING use if free-surface passive/active nudging term
NORTH_FSCLAMPED use if free-surface clamped condition
NORTH_M2FLATHER use if 2D momentum Flather condition
NORTH_M2GRADIENT use if 2D momentum gradient condition
NORTH_M2RADIATION use if 2D momentum radiation condition
NORTH_M2REDUCED use if 2D momentum reduced-physics
NORTH_M2NUDGING use if 2D momentum passive/active nudging term
NORTH_M2CLAMPED use if 2D momentum clamped condition
NORTH_M3GRADIENT use if 3D momentum gradient condition
NORTH_M3RADIATION use if 3D momentum radiation condition
NORTH_M3NUDGING use if 3D momentum passive/active nudging term
NORTH_M3CLAMPED use if 3D momentum clamped condition
NORTH_KGRADIENT use if TKE fields gradient condition
NORTH_KRADIATION use if TKE fields radiation condition
NORTH_TGRADIENT use if tracers gradient condition
NORTH_TRADIATION use if tracers radiation condition
NORTH_TNUDGING use if tracers passive/active nudging term
NORTH_TCLAMPED use if tracers clamped condition

Options for southern edge open boundary conditions

Select only one option for free-surface, 2D momentum, 3D momentum, and tracers. The turbulent kinetic energy (TKE) conditions are only activated for the Generic length scale or Mellor-Yamada 2.5 vertical mixing closures. If open boundary radiation conditions, an additional option can be activated at each boundary edge to include a passive (active) nudging term with weak (strong) values for outflow (inflow).
SOUTH_FSCHAPMAN use if free-surface Chapman condition
SOUTH_FSGRADIENT use if free-surface gradient condition
SOUTH_FSRADIATION use if free-surface radiation condition
SOUTH_FSNUDGING use if free-surface passive/active nudging term
SOUTH_FSCLAMPED use if free-surface clamped condition
SOUTH_M2FLATHER use if 2D momentum Flather condition
SOUTH_M2GRADIENT use if 2D momentum gradient condition
SOUTH_M2RADIATION use if 2D momentum radiation condition
SOUTH_M2REDUCED use if 2D momentum reduced-physics
SOUTH_M2NUDGING use if 2D momentum passive/active nudging term
SOUTH_M2CLAMPED use if 2D momentum clamped condition
SOUTH_M3GRADIENT use if 3D momentum gradient condition
SOUTH_M3RADIATION use if 3D momentum radiation condition
SOUTH_M3NUDGING use if 3D momentum passive/active nudging term
SOUTH_M3CLAMPED use if 3D momentum clamped condition
SOUTH_KGRADIENT use if TKE fields gradient condition
SOUTH_KRADIATION use if TKE fields radiation condition
SOUTH_TGRADIENT use if tracers gradient condition
SOUTH_TRADIATION use if tracers radiation condition
SOUTH_TNUDGING use if tracers passive/active nudging term
SOUTH_TCLAMPED use if tracers clamped condition

Options for tidal forcing at open boundaries

The tidal data is processed in terms of tidal components, classified by period. The tidal forcing is computed for the full horizontal grid. If requested, the tidal forcing is added to the processed open boundary data. Both tidal elevation and tidal currents are required to force the model properly. However, if only the tidal elevation is available, the tidal

currents at the open boundary can be estimated using reduced physics equations. Only the pressure gradient, Coriolis, and surface and bottom stresses terms are considered at the open boundary. See u2dbc_im.F or v2dbc_im.F for details. Notice that there is an additional option (FSOBC_REDUCED) for the computation of the pressure gradient term in both Flather or reduced physics conditions (*_M2FLATHER, *_M2REDUCED).

SSH_TIDES use if imposing tidal elevation
UV_TIDES use if imposing tidal currents
RAMP_TIDES use if ramping (over one day) tidal forcing
FSOBC_REDUCED use if SSH data and reduced physics conditions
ADD_FSOBC use to add tidal elevation to processed open boundary conditions data
ADD_M2OBC use to add tidal currents to processed open boundary conditions data

Options for reading and processing of climatological fields

M2CLIMATOLOGY use if processing 2D momentum climatology
M3CLIMATOLOGY use if processing 3D momentum climatology
TCLIMATOLOGY use if processing tracers climatology
ZCLIMATOLOGY use if processing SSH climatology

Options to nudge climatology data

These options are used primarily on sponge areas.
M2CLM_NUDGING use if nudging 2D momentum climatology
M3CLM_NUDGING use if nudging 3D momentum climatology
TCLM_NUDGING use if nudging tracers climatology
ZCLM_NUDGING use if nudging SSH climatology

Options for Optimal Interpolation or nudging data assimilation

The Optimal Interpolation (OI) assimilation is intermittent whereas nudging is continuous (observations are time interpolated). If applicable, choose only one option for each field to update: either OI assimilation or nudging.
ASSIMILATION_SSH use if assimilating SSH observations
ASSIMILATION_SST use if assimilating SST observations
ASSIMILATION_T use if assimilating tracers observations
ASSIMILATION_UVsur use if assimilating surface current observations
ASSIMILATION_UV use if assimilating horizontal current observations
UV_BAROCLINIC use if assimilating baroclinic currents only
NUDGING_SSH use if nudging SSH observations
NUDGING_SST use if nudging SST observations
NUDGING_T use if nudging tracers observations
NUDGING_UVsur use if nudging surface current observations
NUDGING_UV use if nudging horizontal currents observations

Options for ROMS/TOMS driver

Choose only one option.
ADM_DRIVER use if generic adjoint model driver
AD_SENSITIVITY use if adjoint sensitivity driver
AFT_EIGENMODES use if adjoint finite time eingenmodes driver
CONVOLUTION use if adjoint convolution driver
CORRELATION use if background-error correlation model driver
ENSEMBLE use if ensemble prediction driver
FORCING_SV use if forcing singular vectors driver
FT_EIGENMODES use if finite time eingenmodes driver: normal modes
GRADIENT_CHECK use if tangent linear and adjoint codes gradient test
INNER_PRODUCT use if tangent linear and adjoint inner product check
IS4DVAR use if incremental 4DVar data assimilation
IS4DVAR_OLD use if old incremental 4DVar data assimilation
OPT_OBSERVATIONS use if optimal observations driver
OPT_PERTURBATION use if optimal perturbations driver, singular vectors
PICARD_TEST use if representer tangent linear model test
PSEUDOSPECTRA use if pseudospectra of tangent linear resolvant
R_SYMMETRY use if representer matrix symmetry test
RPM_DRIVER use if generic representers model driver
SANITY_CHECK use if tangent linear and adjoint codes sanity check
SO_SEMI use if stochastic optimals driver, semi-norm
SO_TRACE use if stochastic optimals, randomized trace
STOCHASTIC_OPT use if stochastic optimals
S4DVAR use if Strong constraint 4DVar data assimilation
TLM_CHECK use if tangent linear model linearization check
TLM_DRIVER use if generic tangent linear model driver
W4DPSAS use if weak constraint 4D-PSAS data assimilation
W4DVAR use if Weak constraint 4DVar data assimilation

Options associated with tangent linear, representer and adjoint models

ADJUST_STFLUX use if including surface tracer flux in 4DVar state
ADJUST_WSTRESS use if including wind-stress in 4DVar state ** use if error covariance multivariate balance term
CELERITY_WRITE use if writing radiation celerity in forward file
CONVOLVE use if convolving solution with diffusion operators
ENERGY1_NORM use if cost function scaled with the energy norm, 1
ENERGY2_NORM use if cost function scaled with the energy norm, 2
ENERGY3_NORM use if cost function scaled with the energy norm, 3
FORWARD_MIXING use if processing forward vertical mixing coefficient
FORWARD_WRITE use if writing out forward solution, basic state
FORWARD_READ use if reading in forward solution, basic state
FORWARD_RHS use if processing forward right-hand-side terms
FULL_GRID use to consider both interior and boundary points
IMPLICIT_VCONV use if implicit vertical convolution algorithm
IMPULSE use if processing adjoint impulse forcing
IOM use to activate IOM multiple executables
LANCZOS use to activate Lanczos conjugate gradient algorithm
MULTIPLE_TLM use if multiple TLM history files in 4DVAR
N2NORM_PROFILE use if N2(z) profile for energy normalization
NLM_OUTER use if nonlinear model as basic state in outer loop
RPM_RELAXATION use if Picard iterations, Diffusive Relaxation of RPM
SO_SEMI_WHITE use to activate white/red noise processes
VCONVOLUTION use to add vertical correlation to 3D convolution
VERIFICATION use if writing out solution at observation locations

Options for Fasham-type biological model

BIO_FASHAM use if Fasham type nitrogen-based model
BIO_SEDIMENT use to restore fallen material to the nutrient pool
CARBON use to add carbon constituents
DENITRIFICATION use to add denitrification processes
OXYGEN use to add oxygen dynamics
OCMIP_OXYGEN_SC use if Schmidt number from Keeling et al. (1998)
RIVER_BIOLOGY use to process river biology point-sources
TALK_PROGNOSTIC use if prognostic/diagnotic alkalinity

Options for NPZD biological model

NPZD_FRANKS use if NPZD Biology model, Franks et al. (1986)
NPZD_POWELL use if NPZD Biology model, Powell et al. (2006)

Options for bio-optical EcoSim model

ECOSIM use if bio-optical EcoSim model

Options for sediment transport model

SEDIMENT use to activate sediment transport model
BEDLOAD_MPM use to activate Meyer-Peter-Mueller bed load
BEDLOAD_SOULSBY use to activate Soulsby wave/current bed load
RIVER_SEDIMENT use to process river sediment point-sources
SED_DENS use to activate sediment to affect equation of state
SED_MORPH use to allow bottom model elevation to evolve
SUSPLOAD use to activate suspended load transport

Options for two-way coupling to other models

REFDIF_COUPLING use if coupling to REFDIT wave model
SWAN_COUPLING use if coupling to SWAN wave model
WRF_COUPLING use if coupling to WRF atmospheric model

Options for nearshore stresses and shallow water configurations

WET_DRY use to activate wetting and drying
NEARSHORE_MELLOR use to activate radiation stress terms.

Options for NetCDF input and output

INLINE_2DIO use if processing 3D IO level by level
NO_WRITE_GRID use if not writing grid arrays
PERFECT_RESTART use to include perfect restart variables
READ_WATER use if only reading water points data
WRITE_WATER use if only writing water points data
RST_SINGLE use if writing single precision restart fields
OUT_DOUBLE use if writing double precision output fields

Options for idealized test problems

These tests are defined using analytical expressions. Choose only one configuration.
A4DVAR_TOY 4DVAR Data Assimilation Toy
BASIN Big Bad Basin Example
BENCHMARK Benchmark Tests (small, Medium, big grids)
BIO_TOY One-dimension (vertical) Biology Toy
BL_TEST Boundary Layers Test
CANYON_A Canyon_A Example
CANYON_B Canyon_B Example
CHANNEL_NECK Channel with a Constriction
COUPLING_TEST Two-way Atmosphere-Ocean Coupling Test
DOUBLE_GYRE Idealized Double-gyre Example
ESTUARY_TEST Test Estuary for Sediment
FLT_TEST Float Tracking Example
GRAV_ADJ Graviational Adjustment Example
INLET_TEST Test Inlet Application
KELVIN Kelvin wave test
LAB_CANYON Lab Canyon, Polar Coordinates Example
LAKE_SIGNELL Lake Signell Sediment Test Case
LMD_TEST Test for LMD and KPP
OVERFLOW Graviational/Overflow Example
RIVERPLUME1 River Plume Example 1
RIVERPLUME2 River plume Example 2 (Hyatt and Signell)
SEAMOUNT Seamount Example
SED_TEST1 Suspended Sediment Test in a Channel
SED_TOY One-dimension (vertical) Sediment Toy
SHOREFACE Shore Face Planar Beach Test Case
SOLITON Equatorial Rossby Wave Example
TEST_CHAN Sediment Test Channel Case
TEST_HEAD Sediment Test Headland Case
UPWELLING Upwelling Example (default)
WEDDELL Idealized Weddell Sea Shelf Application
WINDBASIN Linear Wind-driven Constant Coriolis Basin

Options for climatological applications

These applications require input NetCDF files which can be downloaded from ROMS web site.
DAMEE_4 North Atlantic DAMEE Application, 3/4 degree

Options for selected realistic applications

ADRIA02 Adriatic Sea Application
NJ_BIGHT New Jersey Bight Application