Ocean Modeling Discussion

ROMS/TOMS

Search for:
It is currently Wed Sep 18, 2019 8:01 pm




Post new topic Reply to topic  [ 3 posts ] 

All times are UTC

Author Message
 Post subject: ROMS/TOMS Plotting
PostPosted: Mon Oct 01, 2018 11:47 am 
Offline

Joined: Thu Apr 05, 2018 6:34 pm
Posts: 15
Location: Ha Noi University Sience and Technology, Vietnam
when i Installing the ROMS/TOMS Plotting Package folow link: https://www.myroms.org/wiki/Plotting_Pa ... stallation
when i " sudo make" i got:
This makefile requires one of GNU make version 3.80 3.81 3.82..
so i MUST use GNU make 3.8x,...?


Top
 Profile  
Reply with quote  
 Post subject: Re: ROMS/TOMS Plotting
PostPosted: Mon Oct 01, 2018 5:27 pm 
Offline
User avatar

Joined: Wed Jul 02, 2003 5:29 pm
Posts: 3667
Location: IMS/UAF, USA
No, no, better to edit the makefile to match that of ROMS. Specifically, these lines:
Code:
ifneq (3.80,$(firstword $(sort $(MAKE_VERSION) 3.80)))
 $(error This makefile requires GNU make version 3.80 or higher. \
                Your current version is: $(MAKE_VERSION))
endif


Top
 Profile  
Reply with quote  
 Post subject: Re: ROMS/TOMS Plotting
PostPosted: Mon Oct 01, 2018 6:19 pm 
Offline

Joined: Thu Apr 05, 2018 6:34 pm
Posts: 15
Location: Ha Noi University Sience and Technology, Vietnam
kate wrote:
No, no, better to edit the makefile to match that of ROMS. Specifically, these lines:
Code:
ifneq (3.80,$(firstword $(sort $(MAKE_VERSION) 3.80)))
 $(error This makefile requires GNU make version 3.80 or higher. \
                Your current version is: $(MAKE_VERSION))
endif

Thank Kate!
but after i code "make" :
make: /opt/g95soft/serial/netcdf4/bin/nc-config: Command not found
make: /opt/g95soft/serial/netcdf4/bin/nc-config: Command not found
Bin/sfmakedepend --cpp --fext=f90 --file=- --objdir=Build_plt -I Include -I Util
ity --silent --moddir Build_plt Utility/curlz.F Utility/velocity.F Utility/slev
els.F Utility/xhslice.F Utility/checkstrm.F Utility/cntint.F Utility/cnt_frame.F
Utility/draw_line.F Utility/fdiag.F Utility/time_indx.F Utility/hindices.F Util
ity/barlab.F Utility/wind_barbs.F Utility/get_dpres.F Utility/entropy.F Utility/
draw_user.F Utility/get_ape.F Utility/get_wcurl.F Utility/check3d.F Utility/cfie
ld.F Utility/get_bvf.F Utility/setcolpal.F Utility/ri_number.F Utility/landmask.
F Utility/great_int.F Utility/colram.F Utility/depth_iso.F Utility/get_pv.F Util
ity/sec_axis.F Utility/get_2dfld.F Utility/datevec.F Utility/dens.F Utility/what
_flds.F Utility/zisopyc.F Utility/dombox.F Utility/get_scoor.F Utility/get_nc2da
t.F Utility/xsection.F Utility/yearday.F Utility/maptitles.F Utility/hordiv.F Ut
ility/areamask.F Utility/cvector.F Utility/get_ncobs.F Utility/lenstr.F Utility/
sec_frame.F Utility/get_nc3pos.F Utility/get_bernoulli.F Utility/readpal.F Utili
ty/mskscl.F Utility/get_pltday.F Utility/read_fname.F Utility/clrbox.F Utility/s
plint.F Utility/drawcl.F Utility/get_nc1dat.F Utility/get_jebar.F Utility/hbackg
round.F Utility/datestr.F Utility/get_ertel.F Utility/vecmag.F Utility/depth_lab
.F Utility/vvumxy.F Utility/cntpack.F Utility/opencdf.F Utility/ertel.F Utility/
spline.F Utility/bcintrp.F Utility/day_code.F Utility/get_entropy.F Utility/insi
de.F Utility/get_rig.F Utility/mapeod.F Utility/crash.F Utility/geodesic_dist.F
Utility/mskerr.F Utility/get_isosur.F Utility/lintrp.F Utility/vbackground.F Uti
lity/jebar.F Utility/stumsl.F Utility/svel.F Utility/stumxy.F Utility/datenum.F
Utility/get_pig.F Utility/readpar.F Utility/get_nc3dat.F Utility/vecpack.F Utili
ty/cgrid.F Utility/box.F Utility/relvor.F Utility/get_date.F Utility/check2d.F U
tility/viewport.F Utility/streamlines.F Utility/get_hdiv.F Utility/cntcolor.F Ut
ility/vvtext.F Utility/get_rvor.F Utility/bv_freq.F Utility/fldnam2id.F Utility/
get_hslope.F Utility/caldate.F Utility/sec_rotvec.F Utility/vindices.F Utility/z
grid.F Utility/cpmpxz2d.F Utility/bernoulli.F Utility/get_nc2pos.F Utility/get_3
dfld.F Utility/filter.F Utility/dateref.F Utility/gksinit.F Utility/cpmpxy2d.F U
tility/areafill.F Utility/colorbar.F Drivers/Fnames.F Drivers/csec.F Drivers/sec
.F Drivers/ccnt.F Drivers/fieldid.F Drivers/cnt.F > Build_plt/MakeDepend
make: /opt/g95soft/serial/netcdf4/bin/nc-config: Command not found
make: /opt/g95soft/serial/netcdf4/bin/nc-config: Command not found
/usr/bin/cpp -P -traditional -I/include -DLINUX -DX86_64 -DG77 -DNCARG520 -Drmdo
cinc -IInclude -IUtility Utility/curlz.F > Build_plt/curlz.f90
Bin/cpp_clean Build_plt/curlz.f90
cd Build_plt; -c -fno-second_underscore -O3 -ffast-math curlz.f90
/bin/sh: 1: -c: not found
Utility/Module.mk:15: recipe for target 'Build_plt/curlz.o' failed
make: *** [Build_plt/curlz.o] Error 127


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group