ROMS-SWAN Coupled System Users

Sediment modeling collaborators: issues, applications, information exchange

Moderators: arango, robertson, rsignell

Post Reply
Message
Author
jcwarner
Posts: 1172
Joined: Wed Dec 31, 2003 6:16 pm
Location: USGS, USA

ROMS-SWAN Coupled System Users

#1 Unread post by jcwarner »

If you are using the ROMS-SWAN Coupled system, please respond to this post or send me an email
jcwarner@usgs.gov
and just say that you are using the system and ,if you could, just one sentence that says where/what you are doing. I am trying to get a compiled list of current investigators using the system.

thanks,
john

ljzhong
Posts: 15
Joined: Tue Nov 25, 2003 3:36 pm
Location: CSIRO

Re: ROMS-SWAN Coupled System Users

#2 Unread post by ljzhong »

John, I am using ROMS-SWAN to study the wave-driven circulation in a lagoon system off Western Australia.

Liejun

yang
Posts: 56
Joined: Mon Sep 25, 2006 2:37 pm
Location: Institue of oceanology ,Chinese acedemy of scinece

Re: ROMS-SWAN Coupled System Users

#3 Unread post by yang »

i am learning the ROMS-swan coupled system to study how sea wave effect the sea upper mixing layer.

abever
Posts: 23
Joined: Tue Feb 17, 2004 6:15 pm
Location: Anchor QEA, LLC

Re: ROMS-SWAN Coupled System Users

#4 Unread post by abever »

I am using it to study sediment transport in Poverty Bay, New Zealand.

nirnimesh
Posts: 27
Joined: Tue Sep 11, 2007 6:57 pm
Location: University of Washington
Contact:

Re: ROMS-SWAN Coupled System Users

#5 Unread post by nirnimesh »

I am using it for study of nearshore circulation in South Carolina...

nobuhitomori
Posts: 22
Joined: Fri Jul 08, 2005 5:42 pm
Location: Kyoto University

Re: ROMS-SWAN Coupled System Users

#6 Unread post by nobuhitomori »

Dear John,

I am using ROMS-SWAN coupling model to study large scale circulation in Osaka bay, Japan. I'm also applying ROMS-SWAN coupling model to storm surge problem in Japan.

taebi
Posts: 1
Joined: Mon Sep 15, 2008 1:28 pm
Location: University of Western Australia

Re: ROMS-SWAN Coupled System Users

#7 Unread post by taebi »

I'm using ROMS-SWAN to study circulation in fringing reef system in Western Australia.

hbzong
Posts: 36
Joined: Thu Oct 04, 2007 4:14 am
Location: Fathom Science
Contact:

Re: ROMS-SWAN Coupled System Users

#8 Unread post by hbzong »

John, I'm using ROMS-SWAN coupling model to study wind wave induced sediment resuspension in the Yellow River Estuary of China.

leon
Posts: 78
Joined: Mon Mar 03, 2008 4:14 am

Re: ROMS-SWAN Coupled System Users

#9 Unread post by leon »

Hi, John, I will use the ROMS-SWAM Coupled System to do some research on the sediment transport.

User avatar
drews
Posts: 35
Joined: Tue Jun 19, 2007 3:32 pm
Location: National Center for Atmospheric Research
Contact:

Re: ROMS-SWAN Coupled System Users

#10 Unread post by drews »

I am using ROMS-SWAN to study storm surge and wind setdown on Lake Erie. Wave radiation stress does not appear to make much difference. Is there a formulation for wave-dependent surface drag?

flcastej
Posts: 68
Joined: Tue Nov 10, 2009 6:42 pm
Location: Technical University of Cartagena,Murcia, Spain

Re: ROMS-SWAN Coupled System Users

#11 Unread post by flcastej »

I am using it for my phD, studying the interaction wave-current in a coastal lagoon in Spain.

rgon
Posts: 12
Joined: Thu Jan 29, 2009 4:00 pm
Location: University of Plymouth

Re: ROMS-SWAN Coupled System Users

#12 Unread post by rgon »

Hi, I used the ROMS+SWAN coupled system to study wave-tide interaction and sediment transport distribution affected by a wave farm. Also I use the COAWST system for similar purposes.
btw: is anyone using COAWST with wind fields for the Refined-case in SWAN? I have some FAQ.
Thanks very much.

moriarty
Posts: 1
Joined: Tue Jul 14, 2009 3:07 pm
Location: Virginia Institute of Marine Science

Re: ROMS-SWAN Coupled System Users

#13 Unread post by moriarty »

I'm using a ROMS-SWAN model to study sediment transport and deposition on the Waipaoa Shelf, New Zealand for my M.S. degree.

jtkirby
Posts: 2
Joined: Fri Jun 04, 2004 8:50 pm
Location: Center for Applied Coastal Research, U. of Delawar

Re: ROMS-SWAN Coupled System Users

#14 Unread post by jtkirby »

John -

We are using ROMS-SWAN in several applications:

(1) looking at effects of waves on discharge plumes and sedimentation processes from small rivers.

(2) Processes in Delaware Bay

(3) Processes in the Delaware Inland Bay system, with future applications to long term evolution of fringing salt marshes.

Jim

abever
Posts: 23
Joined: Tue Feb 17, 2004 6:15 pm
Location: Anchor QEA, LLC

Re: ROMS-SWAN Coupled System Users

#15 Unread post by abever »

I had forgotten this page existed. Sandro and I used it for the Bevano River inlet on the east coast of Italy.

carniel
Posts: 17
Joined: Tue Feb 17, 2004 10:12 am
Location: CNR-ISMAR

Re: ROMS-SWAN Coupled System Users

#16 Unread post by carniel »

Hi all,
I have been using ROMS-SWAN coupled system in the Adriatic Sea, Italy.

csherwood
Posts: 39
Joined: Fri Apr 02, 2004 4:46 pm
Location: USGS, Woods Hole, USA

Re: ROMS-SWAN Coupled System Users

#17 Unread post by csherwood »

Hi John,

I am using it for test cases and at MVCO.

-Chris
Chris Sherwood, USGS
1 508 457 2269

hoshuenn
Posts: 2
Joined: Mon Feb 25, 2008 4:53 pm
Location: National Kaohsiung University of Science and Technology

Re: ROMS-SWAN Coupled System Users

#18 Unread post by hoshuenn »

Dear John:

I am using ROMS-SWAN coupled system to study the tidal and wave interactions towards Kaohsiung harbors in Taiwan.

Ho-Shuenn

hslim

Re: ROMS-SWAN Coupled System Users

#19 Unread post by hslim »

Dear John,

I am using ROMS-SWAN coupled system to study the wave-current interactions towards coastal waters of Korea.

Hak-Soo Lim

gabimta
Posts: 1
Joined: Tue Jul 05, 2011 1:28 am
Location: IMTA

Re: ROMS-SWAN Coupled System Users

#20 Unread post by gabimta »

Hello:

We´re using ROMS-SWAN coupled system to study the interaction wave-currents in the Mexican coast to evaluate its impact in the wave energy distribution

Gaby-Antonio
IMTA

nguyenduoc
Posts: 1
Joined: Sat Sep 17, 2011 3:08 pm
Location: RIMSI

Re: ROMS-SWAN Coupled System Users

#21 Unread post by nguyenduoc »

Hi, I am using ROMS - SWAN coupling to research sediment transport mechanism at coastal area of the Vietnam Southern (South China Sea)

marcelcure
Posts: 9
Joined: Fri Oct 22, 2004 8:32 pm
Location: Numerics Warehouse Ltd.

Re: ROMS-SWAN Coupled System Users

#22 Unread post by marcelcure »

John,

My company Numerics Warehouse Ltd. has and continues to use the coupled ROMS-SWAN system for a number of ocean energy related projects including :-

(1) Extreme storm simulations to evaluate the 3D current field at sub-sea turbines close to the French coast for a tidal turbine developer.
(2) Coupled ROMS-SWAN-Community-Sediment Transport model to investigate the effect of extreme storms on sand wave movement on the west coast of Ireland to assess the stability of offshore wind turbine foundations.
(3) To investigate the effect of storm surge and wave radiation stress in creating current jets in the vicinity of sub sea turbines in the Orkney Islands.

We are grateful that you have made this code available. Keep up the good work.

Regards,

Marcel Cure

Post Reply