About the open boundary condition

Sediment modeling collaborators: issues, applications, information exchange

Moderators: arango, robertson, rsignell

Post Reply
Message
Author
liangliang
Posts: 61
Joined: Mon Jul 20, 2009 2:41 pm
Location: Port And Costal Engineering Laboratory

About the open boundary condition

#1 Unread post by liangliang »

hi:
I want add the free-surface boundary conditions on the open boundary.I konw that it is contained in the bry.nc.But in the bry.nc,there are many other variables ,for example,'ubar,vbar,u,v,temp,salt'.
If i want add the free-surface boundary condition,which cpp option should be activated?
whether is only the 'zeta' used in the bry.nc,and the other variables can be ignored?
Thanks!

User avatar
kate
Posts: 4091
Joined: Wed Jul 02, 2003 5:29 pm
Location: CFOS/UAF, USA

Re: About the open boundary condition

#2 Unread post by kate »

It depends. The boundary conditions I use want both zeta and ubar/vbar. I'm using the Chapman/Flather combination for the depth-integrated mode.

Post Reply