Ocean Modeling Discussion

ROMS/TOMS

Search for:
It is currently Thu Oct 18, 2018 10:41 pm




Post new topic Reply to topic  [ 7 posts ] 

All times are UTC

Author Message
PostPosted: Thu Feb 22, 2018 11:29 pm 
Offline

Joined: Wed Nov 11, 2015 4:49 pm
Posts: 22
Location: Georgia Institute of Technology
Hello,

Thank you in advance.

I am trying to compile coawst.bash using ifort and openmpi. This is the error I got

cd /nv/hnjord1/txu68/scratch/ONR/HF_22m_north_coupled/bin/Build; /usr/local/pacerepov1/openmpi/1.8/intel-15.0/bin/mpif90 -c -heap-arrays -fp-model precise -ip -O3 -assume byterecl -I/nv/hnjord1/txu68/data/COAWST_V33/Lib/MCT/bin/include ocean_coupler.f90
ocean_coupler.f90(18): error #7013: This module file was not generated by any release of this compiler. [M_MCTWORLD]
USE m_MCTWorld, ONLY : MCTWorld_init => init
----------^
ocean_coupler.f90(68): error #6457: This derived type name has not been declared. [GLOBALSEGMAP]
TYPE(GlobalSegMap) :: GSMapROMS ! GloabalSegMap variables
-------------^
ocean_coupler.f90(72): error #6457: This derived type name has not been declared. [ATTRVECT]
TYPE(AttrVect) :: wav2ocn_AV ! AttrVect variables
-------------^
ocean_coupler.f90(73): error #6457: This derived type name has not been declared. [ATTRVECT]
TYPE(AttrVect) :: ocn2wav_AV
-------------^
ocean_coupler.f90(77): error #6457: This derived type name has not been declared. [ROUTER]
TYPE(Router) :: ROMStoSWAN ! Router variables
-------------^
ocean_coupler.f90(18): error #6581: Unresolved rename. [MCTWORLD_INIT]
USE m_MCTWorld, ONLY : MCTWorld_init => init
-----------------------------^
ocean_coupler.f90(19): error #6581: Unresolved rename. [MCTWORLD_CLEAN]
USE m_MCTWorld, ONLY : MCTWorld_clean => clean
-----------------------------^
ocean_coupler.f90(23): error #6580: Name in only-list does not exist. [GLOBALSEGMAP]
USE m_GlobalSegMap, ONLY : GlobalSegMap
---------------------------------^
ocean_coupler.f90(24): error #6581: Unresolved rename. [GLOBALSEGMAP_INIT]
USE m_GlobalSegMap, ONLY : GlobalSegMap_init => init
---------------------------------^
ocean_coupler.f90(25): error #6581: Unresolved rename. [GLOBALSEGMAP_LSIZE]
USE m_GlobalSegMap, ONLY : GlobalSegMap_lsize => lsize
---------------------------------^
ocean_coupler.f90(26): error #6581: Unresolved rename. [GLOBALSEGMAP_CLEAN]
USE m_GlobalSegMap, ONLY : GlobalSegMap_clean => clean
---------------------------------^
ocean_coupler.f90(27): error #6581: Unresolved rename. [GLOBALSEGMAP_ORDPNTS]
USE m_GlobalSegMap, ONLY : GlobalSegMap_Ordpnts => OrderedPoints
---------------------------------^
ocean_coupler.f90(31): error #6580: Name in only-list does not exist. [ATTRVECT]
USE m_AttrVect, ONLY : AttrVect
-----------------------------^
ocean_coupler.f90(32): error #6581: Unresolved rename. [ATTRVECT_INIT]
USE m_AttrVect, ONLY : AttrVect_init => init
-----------------------------^
ocean_coupler.f90(33): error #6581: Unresolved rename. [ATTRVECT_ZERO]
USE m_AttrVect, ONLY : AttrVect_zero => zero
-----------------------------^
ocean_coupler.f90(34): error #6581: Unresolved rename. [ATTRVECT_LSIZE]
USE m_AttrVect, ONLY : AttrVect_lsize => lsize
-----------------------------^
ocean_coupler.f90(35): error #6581: Unresolved rename. [ATTRVECT_CLEAN]
USE m_AttrVect, ONLY : AttrVect_clean => clean
-----------------------------^
ocean_coupler.f90(36): error #6581: Unresolved rename. [ATTRVECT_COPY]
USE m_AttrVect, ONLY : AttrVect_copy => copy
-----------------------------^
ocean_coupler.f90(37): error #6581: Unresolved rename. [ATTRVECT_IMPORTRATTR]
USE m_AttrVect, ONLY : AttrVect_importRAttr => importRAttr
-----------------------------^
ocean_coupler.f90(38): error #6581: Unresolved rename. [ATTRVECT_EXPORTRATTR]
USE m_AttrVect, ONLY : AttrVect_exportRAttr => exportRAttr
-----------------------------^
ocean_coupler.f90(42): error #6580: Name in only-list does not exist. [ROUTER]
USE m_Router, ONLY : Router
---------------------------^
ocean_coupler.f90(43): error #6581: Unresolved rename. [ROUTER_INIT]
USE m_Router, ONLY : Router_init => init
---------------------------^
ocean_coupler.f90(44): error #6581: Unresolved rename. [ROUTER_CLEAN]
USE m_Router, ONLY : Router_clean => clean
---------------------------^
ocean_coupler.f90(48): error #6581: Unresolved rename. [MCT_SEND]
USE m_Transfer, ONLY: MCT_send => send
----------------------------^
ocean_coupler.f90(49): error #6581: Unresolved rename. [MCT_RECV]
USE m_Transfer, ONLY: MCT_recv => recv
----------------------------^
ocean_coupler.f90(50): error #6581: Unresolved rename. [MCT_ISEND]
USE m_Transfer, ONLY: MCT_isend => isend
----------------------------^
ocean_coupler.f90(51): error #6581: Unresolved rename. [MCT_IRECV]
USE m_Transfer, ONLY: MCT_irecv => irecv
----------------------------^
ocean_coupler.f90(52): error #6581: Unresolved rename. [MCT_WAITR]
USE m_Transfer, ONLY: MCT_waitr => waitrecv
----------------------------^
ocean_coupler.f90(53): error #6581: Unresolved rename. [MCT_WAITS]
USE m_Transfer, ONLY: MCT_waits => waitsend
----------------------------^
ocean_coupler.f90(175): error #6498: The use-name for this local-name is not defined. [MCTWORLD_INIT]
CALL MCTWorld_init (N_mctmodels, MPI_COMM_WORLD, &
-------------^
ocean_coupler.f90(1350): catastrophic error: Too many errors, exiting
compilation aborted for ocean_coupler.f90 (code 1)
make: *** [/nv/hnjord1/txu68/scratch/ONR/HF_22m_north_coupled/bin/Build/ocean_coupler.o] Error 1


Best,
Amy


Top
 Profile  
Reply with quote  
PostPosted: Fri Feb 23, 2018 12:12 am 
Offline
User avatar

Joined: Wed Jul 02, 2003 5:29 pm
Posts: 3515
Location: IMS/UAF, USA
Your problems start here:
Code:
ocean_coupler.f90(18): error #7013: This module file was not generated by any release of this compiler. [M_MCTWORLD]
USE m_MCTWorld, ONLY : MCTWorld_init => init
It might be that simply typing "make clean" will fix it. In any case, make sure that the m_mctworld module file goes away, then try again.


Top
 Profile  
Reply with quote  
PostPosted: Fri Feb 23, 2018 12:22 am 
Offline

Joined: Wed Nov 11, 2015 4:49 pm
Posts: 22
Location: Georgia Institute of Technology
Hi Kate,

Thank you for your quick response!!! :)

I did make clean, but I still have the same error.

Are you suggesting that I delete m_mctworld.mod in the MCT include folder?

Best,
Amy


Top
 Profile  
Reply with quote  
PostPosted: Fri Feb 23, 2018 1:06 am 
Offline
User avatar

Joined: Wed Jul 02, 2003 5:29 pm
Posts: 3515
Location: IMS/UAF, USA
Yes, you have one that was built with some other compiler (so it claims).


Top
 Profile  
Reply with quote  
PostPosted: Fri Feb 23, 2018 3:24 am 
Offline

Joined: Wed Nov 11, 2015 4:49 pm
Posts: 22
Location: Georgia Institute of Technology
Hi Kate,

Thanks again for the quick response! :) I really appreciate it!

I have tried to re-compile MCT using ./configure and make install.

I got this error when I ran make install.

make[1]: Entering directory `/gpfs/pace1/project/pnjord1/txu68/COAWST_V33/Lib/MCT/mpeu'
icc -c -DFORTRAN_UNDERSCORE_ -DSYSLINUX -DCPRINTEL -O get_zeits.c
ifort -c -DSYSLINUX -DCPRINTEL -O2 -w -ftz -assume byterecl m_mpif.F90
m_mpif.F90(60): error #5102: Cannot open include file 'mpif.h'
include "mpif.h"
------------------^
m_mpif.F90(35): error #6404: This name does not have a type, and must have an explicit type. [MPI_INTEGER]
public :: MPI_INTEGER
--------------------^
m_mpif.F90(36): error #6404: This name does not have a type, and must have an explicit type. [MPI_REAL]
public :: MPI_REAL
--------------------^
m_mpif.F90(37): error #6404: This name does not have a type, and must have an explicit type. [MPI_DOUBLE_PRECISION]
public :: MPI_DOUBLE_PRECISION
--------------------^
m_mpif.F90(38): error #6404: This name does not have a type, and must have an explicit type. [MPI_LOGICAL]
public :: MPI_LOGICAL
--------------------^
m_mpif.F90(39): error #6404: This name does not have a type, and must have an explicit type. [MPI_CHARACTER]
public :: MPI_CHARACTER
--------------------^
m_mpif.F90(41): error #6404: This name does not have a type, and must have an explicit type. [MPI_REAL4]
public :: MPI_REAL4
--------------------^
m_mpif.F90(42): error #6404: This name does not have a type, and must have an explicit type. [MPI_REAL8]
public :: MPI_REAL8
--------------------^
m_mpif.F90(44): error #6404: This name does not have a type, and must have an explicit type. [MPI_COMM_WORLD]
public :: MPI_COMM_WORLD
--------------------^
m_mpif.F90(45): error #6404: This name does not have a type, and must have an explicit type. [MPI_COMM_NULL]
public :: MPI_COMM_NULL
--------------------^
m_mpif.F90(47): error #6404: This name does not have a type, and must have an explicit type. [MPI_SUM]
public :: MPI_SUM
--------------------^
m_mpif.F90(48): error #6404: This name does not have a type, and must have an explicit type. [MPI_PROD]
public :: MPI_PROD
--------------------^
m_mpif.F90(49): error #6404: This name does not have a type, and must have an explicit type. [MPI_MIN]
public :: MPI_MIN
--------------------^
m_mpif.F90(50): error #6404: This name does not have a type, and must have an explicit type. [MPI_MAX]
public :: MPI_MAX
--------------------^
m_mpif.F90(52): error #6404: This name does not have a type, and must have an explicit type. [MPI_MAX_ERROR_STRING]
public :: MPI_MAX_ERROR_STRING
--------------------^
m_mpif.F90(53): error #6404: This name does not have a type, and must have an explicit type. [MPI_STATUS_SIZE]
public :: MPI_STATUS_SIZE
--------------------^
m_mpif.F90(54): error #6404: This name does not have a type, and must have an explicit type. [MPI_ANY_SOURCE]
public :: MPI_ANY_SOURCE
--------------------^
compilation aborted for m_mpif.F90 (code 1)
make[1]: *** [m_mpif.o] Error 1
make[1]: Leaving directory `/gpfs/pace1/project/pnjord1/txu68/COAWST_V33/Lib/MCT/mpeu'
make: *** [subdirs] Error 2


Best,
Amy


Top
 Profile  
Reply with quote  
PostPosted: Fri Feb 23, 2018 6:11 am 
Offline
User avatar

Joined: Wed Jul 02, 2003 5:29 pm
Posts: 3515
Location: IMS/UAF, USA
Code:
ifort -c -DSYSLINUX -DCPRINTEL -O2 -w -ftz -assume byterecl m_mpif.F90
m_mpif.F90(60): error #5102: Cannot open include file 'mpif.h'
include "mpif.h"
Tell it your compiler is called "mpif90" instead of "ifort". mpif90 should know how to find mpif.h.


Top
 Profile  
Reply with quote  
PostPosted: Fri Feb 23, 2018 6:35 am 
Offline
User avatar

Joined: Tue Jul 01, 2003 4:12 am
Posts: 509
Location: NIWA
I suggest you delete *everything* and start over again, and use a configure command like this

Code:
CPRDEF=INTEL CC=icc FC=ifort MPIFC=mpif90 ./configure


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group