using POP fields as input

Discussion of how to use ROMS on different regional and basin scale applications.

Moderators: arango, robertson

Post Reply
Message
Author
turuncu
Posts: 128
Joined: Tue Feb 01, 2005 8:21 pm
Location: Istanbul Technical University (ITU)
Contact:

using POP fields as input

#1 Post by turuncu » Wed Jul 01, 2009 2:54 am

Hi,

I want to use POP output as IC/BC for ROMS but i couldn't find any information about that. Is there any way to use it? Any suggestion will be helpful.

Thanks,

--ufuk

User avatar
kate
Posts: 3678
Joined: Wed Jul 02, 2003 5:29 pm
Location: IMS/UAF, USA

Re: using POP fields as input

#2 Post by kate » Mon Jul 06, 2009 5:34 pm

Enrique Curchitser has matlab scripts for reading SODA files and using them for ROMS IC/BC. SODA is a global hindcast using POP with data assimilation.

turuncu
Posts: 128
Joined: Tue Feb 01, 2005 8:21 pm
Location: Istanbul Technical University (ITU)
Contact:

Re: using POP fields as input

#3 Post by turuncu » Mon Jul 06, 2009 5:42 pm

I mean that, i want to use specific CCSM3 SRES scenario data such as 20C (b30.30e) and i need to use POP output that belongs to that CCSM output. Is it possible?

I also check the SODA page (i think that http://www.atmos.umd.edu/~ocean/) and i found the base article about that but there is no information about POP. Is this link correct?

thanks,

User avatar
kate
Posts: 3678
Joined: Wed Jul 02, 2003 5:29 pm
Location: IMS/UAF, USA

Re: using POP fields as input

#4 Post by kate » Mon Jul 06, 2009 5:53 pm

Yes, that is the link for SODA-POP. Sometimes in the business you get to be a pioneer and try things before anyone else... You would need to find out if both runs were done using the same POP grid, or find out of the scrips are general enough to handle any grid.

Post Reply