Search found 24 matches

by prakash22
Wed Dec 12, 2018 5:37 am
Forum: ROMS Tools and Techniques
Topic: SEAGRID GENERATION
Replies: 3
Views: 1090

Re: SEAGRID GENERATION

hi pooja, As from my understanding and experience, Seagrid required older version of matlab (bellow 2014) otherwise you need to change many script or function of seagrid. I could also not find any updated version of seagrid code. so I think in place of seagrid you can use easygrid. I hope this will ...
by prakash22
Tue Aug 21, 2018 5:28 am
Forum: ROMS Problems
Topic: Problem in latest version of ROMS while compiling
Replies: 4
Views: 894

Re: Problem in latest version of ROMS while compiling

Yes I got it
I change Tnudg_SSS(ng) with Tnudg(isalt,ng)
now it is working

Thank you much
-Ravi
by prakash22
Mon Aug 20, 2018 5:15 am
Forum: ROMS Problems
Topic: Problem in latest version of ROMS while compiling
Replies: 4
Views: 894

Re: Problem in latest version of ROMS while compiling

Initial I have also the same doubt. So I downloaded freshly and tried but I still get same error ( even I tried in different computer).
Yes I am using trunk code.
by prakash22
Sun Aug 19, 2018 5:05 am
Forum: ROMS Problems
Topic: Problem in latest version of ROMS while compiling
Replies: 4
Views: 894

Problem in latest version of ROMS while compiling

Dear folk, Latest version of ROMS giving compiling error when I use #define SRELAXATION or #define SCORRECTION option in cpp. But using same option I am able to compile successfully in older version of ROMS. The error which I am facing is given bellow: set_vbc_org.f90:203.36: & Tnudg_SSS(ng)*Hz(i,j,...
by prakash22
Thu Jul 20, 2017 11:35 am
Forum: ROMS Problems
Topic: AVERAGES_DETIDES result problem
Replies: 7
Views: 3826

Re: AVERAGES_DETIDES result problem

hi jkoceans11,


I am also facing similar problem like you (Zeta_detide value is too large).

Did you resolve or understand the problem? If yes than Could you tell me how to resolve this issue.


With regards
-Ravi
by prakash22
Mon Jul 17, 2017 10:03 am
Forum: ROMS Problems
Topic: AVERAGES_DETIDES result problem
Replies: 7
Views: 3826

Re: AVERAGES_DETIDES result problem

Now, I am getting following error GET_NGFLD - tidal period (Min = 2.19720215E+04 Max = 2.38071489E+06) GET_2DFLD - tidal elevation amplitude (Min = 0.00000000E+00 Max = 1.64313322E+00) GET_2DFLD - tidal elevation phase angle (Min = -2.86857319E+00 Max = 1.06235184E+01) GET_2DFLD - tidal current incl...
by prakash22
Sun Jul 16, 2017 5:16 am
Forum: ROMS Problems
Topic: AVERAGES_DETIDES result problem
Replies: 7
Views: 3826

Re: AVERAGES_DETIDES result problem

Thank you so much for your kind reply.

Could you tell me how to make write permission in existing netcdf of tide forcing file.

and how to check it whether it has writing permission or not.
by prakash22
Fri Jul 14, 2017 9:06 am
Forum: ROMS Problems
Topic: AVERAGES_DETIDES result problem
Replies: 7
Views: 3826

Re: AVERAGES_DETIDES result problem

Dear All, I am getting the following run error message while simulating ROMS model GET_NGFLD - tidal period (Min = 2.19720215E+04 Max = 2.38071489E+06) GET_2DFLD - tidal elevation amplitude (Min = 0.00000000E+00 Max = 1.64313322E+00) GET_2DFLD - tidal elevation phase angle (Min = -2.86857319E+00 Max...
by prakash22
Fri Jul 07, 2017 4:41 am
Forum: ROMS Usage
Topic: COAWST problem when using 2way WRF-ROMS
Replies: 6
Views: 2538

Re: COAWST problem when using 2way WRF-ROMS

If you send or post you cpp header (.h), .in and output log file. than that will more helpful to understand your problem.
by prakash22
Wed Nov 30, 2016 4:43 am
Forum: ROMS Problems
Topic: Sea cliffs
Replies: 8
Views: 4891

Re: Sea cliffs

thank you so much kate.

my another question is that, In ROMS model storm surge is same as free surface or i have subtract means sea level height from free surface ?
by prakash22
Tue Nov 29, 2016 4:47 am
Forum: ROMS Problems
Topic: Sea cliffs
Replies: 8
Views: 4891

Re: Sea cliffs

Yes I am using seagrid

so Please could you tell me how can I get the version of editmask for change masking level
by prakash22
Mon Nov 28, 2016 6:47 pm
Forum: ROMS Problems
Topic: Sea cliffs
Replies: 8
Views: 4891

Re: Sea cliffs

hello

I new in ROMS modelling. I have to run ROMS for storm-surge

I want to know how can I set masking level to a particular height

please could tell me where I have to set masking level

thanks
-ravi
by prakash22
Sat Nov 26, 2016 4:59 am
Forum: ROMS Tools and Techniques
Topic: Problem to simulating ROMS model with high resolution segrid
Replies: 4
Views: 2558

Re: Problem to simulating ROMS model with high resolution se

sorry I forgot to attached zeta value

now I am attaching zeta
by prakash22
Sat Nov 26, 2016 4:57 am
Forum: ROMS Tools and Techniques
Topic: Problem to simulating ROMS model with high resolution segrid
Replies: 4
Views: 2558

Re: Problem to simulating ROMS model with high resolution se

u.gif
Hikate ,

I am attaching my grid and picture of zeta u-velocity and v-velocity at last time where model was blown up


thanks&regard
-Ravi
by prakash22
Fri Nov 25, 2016 1:39 pm
Forum: ROMS Tools and Techniques
Topic: Problem to simulating ROMS model with high resolution segrid
Replies: 4
Views: 2558

Problem to simulating ROMS model with high resolution segrid

Dear Roms User

When I ran roms model with coarse resolution segrid mesh than everything is going ok

But when I increase the resolution (fine resolution) there is problem in zeta value its going more than 15 meter .

So could you tell me why it is happening


Thanks & regard
-Ravi
by prakash22
Wed Jan 06, 2016 4:43 am
Forum: ROMS Usage
Topic: Open Boundary Problem
Replies: 20
Views: 7490

Re: Open Boundary Problem

But in place of hycom global grid which data I will provide
by prakash22
Tue Jan 05, 2016 11:31 am
Forum: ROMS Usage
Topic: Open Boundary Problem
Replies: 20
Views: 7490

Re: Open Boundary Problem

Hi kate I install pyroms,pyroms_tool successfully but I am not able to create boundary file. I have few doubt like when I ran make_bdry_file.py then I am getting error like _iso , _average file is not found. I copied these file to current directory now I am getting error like Traceback (most recent ...
by prakash22
Mon Jan 04, 2016 4:46 am
Forum: ROMS Usage
Topic: Open Boundary Problem
Replies: 20
Views: 7490

Re: Open Boundary Problem

No, I don't have any preference. So Could you tell me about Matlab tool or can you send me the link of tool.
by prakash22
Sun Jan 03, 2016 10:10 am
Forum: ROMS Usage
Topic: Open Boundary Problem
Replies: 20
Views: 7490

Re: Open Boundary Problem

hi bibi

Could you tell me which tool are you using to create boundary and initial file using hycom global data. if it is possible then could you help me.

That will very helpful.


thanks in Advance
-Prakash
by prakash22
Mon Dec 28, 2015 4:35 pm
Forum: ROMS Discussion
Topic: Issue with thermocline in ROMS output
Replies: 3
Views: 1119

Re: Issue with thermocline in ROMS output

Actually I am using COAWST (ROMS + WRF). so all forcing term are providing by WRF model with the interval of 600 second And LMD with SMAGORINSKY scheme which I used and other information you can see in my header and roms input file which I attached Also I am getting unusual sst cooling and magnitude...
by prakash22
Sat Dec 12, 2015 6:55 pm
Forum: ROMS Discussion
Topic: Issue with thermocline in ROMS output
Replies: 3
Views: 1119

Issue with thermocline in ROMS output

Hello everyone I am running ROMS model during cyclone case my Roms surface parameter is coming correct but problem with sub-surface variable (temperature salinity).In my ROMS output thermocline is 30-40 meter but actually it should be 60-80 meter. Could you give me any Idea to improve my thermocline...
by prakash22
Thu Aug 27, 2015 11:08 am
Forum: ROMS Discussion
Topic: Running Roms during tropical Cyclone
Replies: 2
Views: 1276

Re: Running Roms for tropical Cyclone case study

Hello All Members, I am running ROMS model for the cyclone case study by using the ECMWF surface forcing data and WRF forcing data sets without activating BULK_FORMULA_PHYSICS, but results appear to me that whatever wind stress I am providing to the model, currents are also showing the same intensit...
by prakash22
Wed Aug 26, 2015 7:32 am
Forum: ROMS Discussion
Topic: Running Roms during tropical Cyclone
Replies: 2
Views: 1276

Running Roms during tropical Cyclone

Dear all I am running roms model for tropical cyclone case I am using 3 hourly forcing from wrf-arw output(wind-stress, pressure, netheatflux, fresh-water flux,rain cloud). I define my hedder file (.h) as follow: /*==========Grid Configuration========*/ # define CURVGRID # define MASKING /*=========...
by prakash22
Thu Aug 20, 2015 2:31 pm
Forum: ROMS Discussion
Topic: Surface heat retention, year-round fake "upwelling"
Replies: 21
Views: 9478

Re: Surface heat retention, year-round fake "upwelling"

Hello ROMS Community, Is there anyone who can suggest me how to give direct surface fluxes like (Uwind, Vwind,Pair,Qair,Tair,lwrad,swrad, Cloudfraction,rain) to the model. I am running one experiment with multiple surface forcing files without activating BULK_FLUXES in header(.h) file. /*==========G...