Search found 20 matches

by xwbin
Wed Oct 14, 2015 2:57 am
Forum: ROMS Adjoint
Topic: Use grided AVISO SLA data as observation data
Replies: 2
Views: 1886

Re: Use grided AVISO SLA data as observation data

I have the same problem.And I find that zeta changes after modifying theta_s,theta_b,hc or depth.My roms domain is South China Sea too.I think we can have a disscussion personaly.My qq is 648673743.
by xwbin
Tue Oct 13, 2015 12:43 am
Forum: ROMS Discussion
Topic: about build.sh
Replies: 8
Views: 1668

Re: about build.sh

You are still shooting in the dark to try to get an exact match to HYCOM, aren't you? I know for the Gulf Stream, getting the separation from the coast to match observations is extremely tricky and it depends on many things, including model resolution. I don't know if they've even solved it yet. Yo...
by xwbin
Mon Oct 12, 2015 2:21 pm
Forum: ROMS Discussion
Topic: about build.sh
Replies: 8
Views: 1668

Re: about build.sh

If you want LMD_MIXING, you should include LMD_SKPP and LMD_NONLOCAL and you will have to provide incoming shortwave. LMD_MIXING is about getting mixed-layer depths based on surface fluxes, including those on tracers plus shortwave. I can't imagine that HYCOM would not include all those surface flu...
by xwbin
Sat Oct 10, 2015 8:49 am
Forum: ROMS Discussion
Topic: about build.sh
Replies: 8
Views: 1668

Re: about build.sh

kate wrote:What was wrong with GLS_MIXING? That it doesn't have the non-local term?
I use the LMD_MIXING instead of GLS_MIXING because my model outcome couldn't get closer to the hycom when I define GLS_MIXING.So I try the LMD_MIXING. You mean it is not necessary to use the LMD_MXING?
by xwbin
Sat Oct 10, 2015 2:33 am
Forum: ROMS Discussion
Topic: about build.sh
Replies: 8
Views: 1668

Re: about build.sh

If you look at mod_mixing.F, ghats is defined if either LMD_SKPP or LMD_BKPP are defined. It is also inside #ifdef LMD_NONLOCAL. I expect the latter doesn't make sense without the former. So, try #define LMD_SKPP. If I define LMD_SKPP,the output.dat will remind me that there is no swrad in my forci...
by xwbin
Sat Oct 10, 2015 2:27 am
Forum: ROMS Discussion
Topic: Parameters in my model
Replies: 0
Views: 1061

Parameters in my model

Hi, I wanna to make my model closer to the hycom in order to run some sensitive experiments.I use the hycom data as the boundary and initial condition.The only force is wind from CFRS. The outcome is bad,and I suspect that I don't set the parameters well because most of them are difficult to undert...
by xwbin
Sat Oct 10, 2015 2:12 am
Forum: ROMS Discussion
Topic: the simulation result is bad
Replies: 6
Views: 1320

Re: the simulation result is bad

We know nothing about your parameters. Perhaps if you post them people can chime in with advice. So what is your goal here? Are you running at the HYCOM resolution? Thanks,Kate!I wanna to make my model closer to the hycom in order to run some sensitive experiments.And my model resolution is 1/10°.I...
by xwbin
Fri Oct 09, 2015 2:47 pm
Forum: ROMS Discussion
Topic: about build.sh
Replies: 8
Views: 1668

about build.sh

Hi,
After I using the LMD_MIXING instead of GLS_MIXING in the .h file and inputting "./build.sh" ,here comes the problem which terminate the building order.I upload the error in the attachment.
Any suggestions are welcome!

Thanks!
by xwbin
Fri Oct 09, 2015 2:21 pm
Forum: ROMS Discussion
Topic: SOS : kuroshio in east china sea
Replies: 4
Views: 1267

Re: SOS : kuroshio in east china sea

I have a question about your theta_s,theta_b and Tcline.My model area is South China Sea,and I set the theta_s=7,theta_b=1 like the example in romswiki.I also set the Tcline=300 which in your model is 10.I couldn't tell whether my parameter setting is right or not.You and me have the same area like ...
by xwbin
Fri Oct 09, 2015 6:52 am
Forum: ROMS Discussion
Topic: the simulation result is bad
Replies: 6
Views: 1320

Re: the simulation result is bad

To get the closest to HYCOM, you should use the same surface forcing they use. This would include heat and salt fluxes. Find out if they use a bulk flux formulation internally and do what they do. Thanks,Kate.I will have a try!I suspect that I don't set the parameters well because most of them are ...
by xwbin
Thu Oct 08, 2015 9:19 am
Forum: ROMS Discussion
Topic: the simulation result is bad
Replies: 6
Views: 1320

Re: the simulation result is bad

I doubt that there is something wrong with my cppdef.h file. I think you mean "suspect" and not "doubt". The only thing I see there is signs of a really old ROMS version, nothing all that suspicious. I don't see anything all that alarming about your flow fields either, unless you know from data tha...
by xwbin
Wed Oct 07, 2015 12:44 pm
Forum: ROMS Discussion
Topic: the simulation result is bad
Replies: 6
Views: 1320

the simulation result is bad

Hi, I wanna run a model to analyse the South China Sean Circulation,but the results are realy different comparing with hycom data which I used for the initial and boundary conditions.There is no tide in my model,only the wind from Climate Forecast System Version 2 (CFSv2) and zeta from Hycom drivin...
by xwbin
Thu Aug 27, 2015 6:09 am
Forum: ROMS Discussion
Topic: question follows after splitting bry and wind force file
Replies: 12
Views: 2954

Re: question follows after splitting bry and wind force file

Not unless you have a stations file or something. Did you try it? What happened? Hi Kate, Really thank you for your patience!I find the answer with your help.You remind me that the format is important.It works after I checking the bryname format as well as frcnameformat and deleting a blank line as...
by xwbin
Wed Aug 26, 2015 10:02 am
Forum: ROMS Discussion
Topic: question follows after splitting bry and wind force file
Replies: 12
Views: 2954

Re: question follows after splitting bry and wind force file

ROMS is quite picky about the format of the file. Do you have tabs in the ocean.in? I suggest getting rid of the comment on the line of your first forcing file too. ROMS will ignore comments where the "!" is at the start of the line. Thanks for your help,there are no tabs or any comments as attachm...
by xwbin
Wed Aug 26, 2015 3:30 am
Forum: ROMS Discussion
Topic: question follows after splitting bry and wind force file
Replies: 12
Views: 2954

Re: question follows after splitting bry and wind force file

Dear all
After checking your answers,I still could not solve my problem,why the model did not read the bry2.nc and frc2.nc.Is the update really helpful for my question and where can I get the update?
Thanks for your guys' help!
by xwbin
Thu Jul 23, 2015 2:40 pm
Forum: ROMS Discussion
Topic: question follows after splitting bry and wind force file
Replies: 12
Views: 2954

question follows after splitting bry and wind force file

Dear all My bry file and wind force file are larger than 2G,so I split them according time records. I split bry file into 2 nc files and wind forcing file into 4 nc files. I do not know why the model couldn't read the 'scs_bry2.nc'. When I check the output.dat ,I also could not find 'scs_bry2.nc' 'w...
by xwbin
Sat Jul 04, 2015 1:50 am
Forum: ROMS Discussion
Topic: is this a method to comfirm model steady?
Replies: 4
Views: 1221

Re: is this a method to comfirm model steady?

Hi, You should see an asymptotic curve... something like the figure in attached file. See, for example, Marchesiello, P., McWilliams, J.C., Shchepetkin, A., 2001. Open boundary conditions for long-term integration of regional oceanic models. Ocean Modelling 3, 1-20. Penven et al. (2005) Average cir...
by xwbin
Fri Jul 03, 2015 12:27 pm
Forum: ROMS Discussion
Topic: is this a method to comfirm model steady?
Replies: 4
Views: 1221

Re: is this a method to comfirm model steady?

You don't tell us what the black line is - I assume that's your running ROMS model? So then what is the blue line? How was it computed? Looking at diag.F, the kinetic energy there is computed in a volume-weighted way. In other words, each cell is KE times the cell volume, then you sum all those and...
by xwbin
Thu Jul 02, 2015 1:36 pm
Forum: ROMS Discussion
Topic: Open Boundary issue for current
Replies: 3
Views: 1645

Re: Open Boundary issue for current

i am a new user and my region is the same as yours.Is your model get steady? i think your time is too short to finish "spin up " if your initial u and v value is zero.Maybe i am wrong
by xwbin
Thu Jul 02, 2015 1:22 pm
Forum: ROMS Discussion
Topic: is this a method to comfirm model steady?
Replies: 4
Views: 1221

is this a method to comfirm model steady?

hi all, I have a basic question.Please check my picture which I have uploaded in the attachment. I used the hycom data to caculate the kenetic energy of the South China Sea by using the equation:1/2*m*(u*u+v*v) which I plot in bule line.To clarify the comparion,I just set m=2. Also , I used the 'u_...