Ocean Modeling Discussion

Thank you, Kate

Hi,
The roms output density anomaly is not consistent with the value I calculated using temp and salt. But the roms output potential vorticity is consistent with value I calculated.

Hi, I try to use biharmonic mixing of momentum (UV_VIS4) with UV_SMAGORINSKY. It always blow up quickly, even I shorten the time step. And ROMS give messeage like: CHECKADJ - use caution when activating: UV_SMAGORINSKY REASON: stability problems, WARNING. What's meaning of UV_SMAGORINSKY. What shoul...

Hi,

Using NETCDF4 can obviously decrease nc file bulk.
Is mexnc function able to make it ?
[ncid,status]=mexnc('create',ncname,'clobber');

This is the results from OFES. We can see obvious difference near the west boundary.

Dear kate, I'm interested in the vortex coming from the east boundary. The model grid space is 1/10*1/12 and OFES data resolution is 0.1*0.1 and monthly interval. The strong velocity from the west boundary turns into unstable and forms lots of vortex in the interior region. The simulated resoluts co...

Hi, I try to simulate the northwestern pacific region. Near the boundary, the sst appears discontinuous; the ssh appeares a gradient which results virtual velocity along the boundary. I take the boundary condition like these: Cha for free surface, Fla for 2D momentum, RadNud for 3D momentum and trac...

Hi, I want to run model several years with climatological forcing, so I add the attribute 'cycle_length' to the time, for example v3d_time,temp_time,salt_time in CLMNAME file. I have to splite the CLMNAME file into 2 file due to the data volume problem. But It outputs this error: current model time ...

Hi,
I donot understand the S-coordinate parameter hc and Tcline. I use the Transforme 2 equation and find that only hc is used. hc donot need to equal Tcline. What's the role of Tcline.

I have solved the trouble. varinfo.dat file is out of date.

Hi, I'm trying to nudge to climatology using ocean_nudgcoef.nc file. I turn on nudging of 3D momentum and tracer. I get the error information: can not find the variable in NETCDF: ocean_nudgcoef. I have checked that file, all variables including M2_NudgeCoef, M3_NudgeCoef, temp_NudgeCoef, salt_Nudge...

Thank you very much

Hi,
ROMS seems only accept the longitude and latitude of monotonous increasing. If you provide the latitude like [30 29 28 27 26 25] instead of [25 26 27 28 29 30], the weird min/max values above appear.

I have checked the data, it is just this problem. Thank you very much.

Hi,
The atmospheric forcing variables are from NCEP2. As long as I turn on the BULK_FLUXES, it blows up at first step. No nans in the forcing file. However, I tryed the analytical values, it works ok.

Hi Saeed,
I can make some simple programming using python. Do you have the source code generating curvilinear grid? I can follow and try it interactively by Ipython. I will make learning easier. Thank you.

Hi,
Who has generated curvilinear gird using octant? Do you have a manual or just provide an example?
Thanks a lot.

Thanks kate for your reply,
I checked the orthogonality of my grid, the results is not good.
Should I use curvilinear grid carefully, and just use the land masking?

Hi,
I try to produce a fan-shaped grid with seagrid, but I doubt that the orthogonality of the grid affects the calculation. I'm not sure whether the curvilinear orthogonal grid is proper.

The global attributes are too long, and I want concise ones in the NETCDF files.
Thanks for your advises.

Kate, I'm sorry for my not reply, because I was on a business trip several days ago. In the following code ifdef USE_MPI CPPFLAGS += -DMPI ifdef USE_MPIF90 FC := /opt/intel/composer_xe_2013_sp1.0.080/bin/intel64/ifort LD := $(FC) else LIBS += -lfmpi-pgi -lmpi-pgi If I set FC FC := /home/fei/local/op...

Hi kate,
I am on linux, I want to set FORT to ifort.
In Linux-ifort.mk file, I didn't set USE_MPI and USE_MPIF90.
I have read the FAQ, but I don't how to set them.
how can I set the USE_MPI, USE_MPIF90 and the FC to its full path.

Hi kate, I got nothing from the command 'which mpif90 which gfortran' I use ifort compiler. After I put 'which ifort',I got '/opt/intel/composer_xe_2013_sp1.0.080/bin/intel64/ifort'. I tried to set FC :=$(/opt/intel/composer_xe_2013_sp1.0.080/bin/intel64/ifort). The problem is still unsolved. What s...

Hi kate: I'm sorry. I'm so careless. I modify the MY_PROJECT_DIR: MY_PROJECT_DIR=${MY_ROOT_DIR}/Projects/upwelling After I run again, I got the problem as follow: rm -f -r core *.ipo /home/fei//Projects/upwelling/Build /home/fei/make_macros.mk makefile:238: INCLUDING FILE /home/fei/make_macros.mk WH...

Thanks very much!

Thanks kate for your answer I'm using build.bash and the raw makefile. My source code is at /home/fei/roms/trunk. MY_ROOT_DIR and MY_PROJECT_DIR as follows: export MY_ROOT_DIR=/home/fei/ export MY_PROJECT_DIR=${MY_PROJECT_DIR}/Projects/upwelling In file included from Compilers/make_macros.h:16:0: Co...

Hi I'm trying to run upwelling test and I get some troubles, like: rm -f -r core *.ipo /Projects/upwelling/Build /home/fei/make_macros.mk In file included from Compilers/make_macros.h:16:0: Compilers/../ROMS/Include/cppdefs.h:625:22: fatal error: /Projects/upwelling/upwelling.h: No such file or dire...

Hi,all! I have installed zlib hdf5 netcdf-4.3. I'm trying to install netcdf-fortran, 1)export LD_LIBRARY_PATH=${DIR}/lib:${LD_LIBRARY_PATH} 2)CPPFLAGS=-I${DIR}/include LDFLAGS=-L${DIR}/lib ./configure --prefix=${DIR} 3)make check After making check netcdf-fortran,problems as follows: PASS: create_fi...

After configuration of hdf5,the result as follows, is there problem? Parallel HDF5: no High Level library: yes Threadsafety: no Default API Mapping: v18 With Deprecated Public Symbols: yes I/O filters (external): deflate(zlib) I/O filters (internal): shuffle,fletcher32,nbit,scaleoffset MPE: no Direc...