Search found 47 matches

by bibi951
Thu Jul 30, 2009 3:25 am
Forum: ROMS Problems
Topic: Vertical tracer advection
Replies: 20
Views: 12137

Re: Vertical tracer advection

Hello,Kate I do tide simulation,and I think bottom friction really matters a lot.I use RDRG2 but it seems not good for my case,since my area is too large(the whole China Sea). I notice that you use spatial distributed bottom drag. What's your rationale for a grid size dependent (if that's what it is...
by bibi951
Wed Jul 29, 2009 7:59 am
Forum: ROMS Usage
Topic: Open Boundary Problem
Replies: 20
Views: 14689

Re: Open Boundary Problem

Hello,everyone. I tried another initial condition derived from hycom, and used nudging mentioned above (20 days of nudging time scale for outflow , 0.5 day for inflow).It partly works(I don't know which contributes more to this, intialization or nudging),however not good enough. ssh and barotropic v...
by bibi951
Sun Jul 26, 2009 8:33 am
Forum: ROMS Usage
Topic: Open Boundary Problem
Replies: 20
Views: 14689

Re: Open Boundary Problem

Thanks for your suggustion.
My OB data is given daily to the interior domain.
I have not tried Clamped OBC yet,maybe that would help.
I am also thinking about nudging ,would 20 days of nudging time scale be OK for outflow , 0.5 day for inflow ?
by bibi951
Fri Jul 24, 2009 12:54 am
Forum: ROMS Usage
Topic: Open Boundary Problem
Replies: 20
Views: 14689

Re: Open Boundary Problem

Yes,parameter f is correct and it varies along latitude.
Maybe I should try another initial condition since it may conflict someway with the open boundary information,consindering they come from different model and differ in time.
I will report the result after this is done.
by bibi951
Thu Jul 23, 2009 12:56 am
Forum: ROMS Usage
Topic: Open Boundary Problem
Replies: 20
Views: 14689

Re: Open Boundary Problem

Thank you for teaching me how to diagnose where the problem may be,Kate. I really appreciate it. I should have shown the CPP flags before. This is what I use NANHAI NANHAI SHUZHISHIYAN ANA_BTFLUX Analytical kinematic bottom temperature flux. ANA_SMFLUX Analytical kinematic surface momentum flux. ANA...
by bibi951
Wed Jul 22, 2009 2:41 am
Forum: ROMS Usage
Topic: Open Boundary Problem
Replies: 20
Views: 14689

Re: Open Boundary Problem

Sorry, I didn't mention my initial condition is taken from SODA-1.4.2 and is climatology yearly mean.Both my soda and hycom data are on z-level surfaces. Maybe the initial condition is the problem? I will show pictures of the process from intial condition to the day 87;and the time varing East open ...
by bibi951
Tue Jul 21, 2009 8:37 am
Forum: ROMS Usage
Topic: Open Boundary Problem
Replies: 20
Views: 14689

Re: Open Boundary Problem

Thank you,Kate. You are always so kind. Sorry,I didn't realize the login problem. Here is the new address http://photo.blog.sina.com.cn/photo/46f52cc946f32f1f7e4be http://photo.blog.sina.com.cn/photo/46f52cc946f32f1f81612#pic and I will send you an email for pictures. My grid is North-South-West-Eas...
by bibi951
Sun Jul 19, 2009 2:07 am
Forum: ROMS Usage
Topic: Open Boundary Problem
Replies: 20
Views: 14689

Open Boundary Problem

Hi,all I do a simulation using Hycom's Global simulation product for my open boundary. I have checked the Open Boundary section field after interpolating them to Roms's s- coordinate.It seems fine although not exactly the same. But I have some doubt about the field consistent.I just use the same poi...
by bibi951
Tue Jun 23, 2009 8:03 am
Forum: ROMS Usage
Topic: RNT toolbox
Replies: 6
Views: 8242

RNT toolbox only run on MATLAB higher than 2007a?

does the RNT_tools(http://www.o3d.org/RNT/) only run on MATLAB higher than 2007a? i encountered many problems when compile and run on MATLAB (R14)2004 I learn from this forum that RNT is highly OS and ARCH dependent.So someone use this TOOL please show me the detailed OS and ARCH requirement.I reall...
by bibi951
Sun Jun 21, 2009 2:06 pm
Forum: ROMS Usage
Topic: RNT toolbox
Replies: 6
Views: 8242

Re: RNT toolbox

I change from Winxp to Ubuntu. But I failed again to recompile the mex-files.I followed the complie.txt said in the RNT website,changing integer*8 to integer since my 32bit. Here is the error message: rnt_compile Warning: You are using gcc version "4.3.3-5ubuntu4)". The earliest gcc versio...
by bibi951
Fri Jun 19, 2009 12:59 pm
Forum: ROMS Usage
Topic: RNT toolbox
Replies: 6
Views: 8242

Re: RNT toolbox

Hi,thanks for your advice.I use win32,and I always encounter this error during running. http://photo.xiaonei.com/getphoto.do?id=1793430397&owner=89107472&curpage=0&t=#1793430397 mainly says forrtl:severe (38):error during write,unit -1,file CONOUT$ rnt_oa2d.mex.dll(etc) unknown unknown w...
by bibi951
Wed Jun 17, 2009 7:21 am
Forum: ROMS Usage
Topic: RNT toolbox
Replies: 6
Views: 8242

RNT toolbox

Hi,everyone. I recently learn to use RNT matlab toolbox released by E. Di Lorenzo (Thanks for his excellent job).I find it really wonderful. However,when I mex the Mex-files,a warning occurs,saying: rnt_compile rnt_fill3ab_mex.F(371) : Warning: In the call to INVERSE, actual argument #5 does not mat...
by bibi951
Mon Jun 15, 2009 5:41 am
Forum: ROMS Usage
Topic: Atmosphere forcing & coordinate convertion
Replies: 13
Views: 11570

Re: Atmosphere forcing & coordinate convertion

Thank you for your kind reply, wilkin.
I checked my netcdf,finally I found that my latitude orientation is wrong.
Now Roms reads the right data.
Thanks
by bibi951
Sat Jun 13, 2009 2:06 pm
Forum: ROMS Usage
Topic: Atmosphere forcing & coordinate convertion
Replies: 13
Views: 11570

Re: Atmosphere forcing & coordinate convertion

Hi,everyone I took data from Ncep (2.5*2.5) and oaflux(1*1),And I wrote cdl file as Kate adviced.However I encounter this error NLM: GET_STATE - Read state initial conditions, t = 0 00:00:00 (File: initial_lJ.nc, Rec=0001, Index=1) .......................... GET_2DFLD - surface u-wind component, t =...
by bibi951
Sat May 30, 2009 9:44 am
Forum: ROMS Usage
Topic: Atmosphere forcing & coordinate convertion
Replies: 13
Views: 11570

Re: Atmosphere forcing & coordinate convertion

Hi,Kate Thank you for your help.It is really kind of you. I use it and I guess Roms does this work,and I don't have to worry about the Missing_Value problem? The second question is about setting the initial condition.I think ROMS will take it as in the xi_eta_s coordinates.(ROMS will not do this wor...
by bibi951
Fri May 29, 2009 3:42 am
Forum: ROMS Usage
Topic: Confused about test cases
Replies: 7
Views: 4663

Re: Confused about test cases

Hi,Mauricio
Do you check the _REDUCED CASE , and see why it blowup at the open boundry.
I am quite confused about how to debug it as I mentioned above.

Regards!
by bibi951
Thu May 28, 2009 7:28 am
Forum: ROMS Usage
Topic: Atmosphere forcing & coordinate convertion
Replies: 13
Views: 11570

Atmosphere forcing & coordinate convertion

Hi everyone I am preparing ROMS Atmosphere foring. And I quite confused about this: 1)Suppose I have interpolate data to the computing grid coordinate(xi,eta),and I have done the rotaion. But how about the scale factor during the coordinate transformation, I just see the rotation, lengh scale doesn'...
by bibi951
Tue May 19, 2009 8:49 am
Forum: ROMS Usage
Topic: Confused about test cases
Replies: 7
Views: 4663

Re: Confused about test cases

I just think of what is the balance in the momentum equition in my simple case? Since my Open Boundry is very close to the equator, will there be a prolem considering f ? I don't think the horizontal pressure gradient is the problem since the depth gradient and my only one vertical layer? But why no...
by bibi951
Tue May 19, 2009 2:06 am
Forum: ROMS Usage
Topic: Confused about test cases
Replies: 7
Views: 4663

Re: Confused about test cases

I had another try.There is no zeta problem mentioned above(seems reasonable-all around 0.6 when ubar goes to the sky).The blowup begines here(red),and spread up-right. The depth is :where 10 means land,and I have checked my mask to be consistent. 10 10 874.75 929.36 833.89 713.79 10 489.22 805.24 10...
by bibi951
Sun May 17, 2009 11:18 am
Forum: ROMS Usage
Topic: Confused about test cases
Replies: 7
Views: 4663

Re: Confused about test cases

Hi,everyone. My case underestimate the tide amplitude,so I suppose that my ubar vbar are not consistent with my zeta.So I use reduced physics by defining FSOBC_REDUCED and ****_M2REDUCED.However it blowup after 8.5days simulation. I checked the ubar and the zeta.I find that there is only one point o...
by bibi951
Thu May 14, 2009 11:49 am
Forum: ROMS Usage
Topic: Confused about test cases
Replies: 7
Views: 4663

Confused about test cases

I am doing a tidal forcing only 2D case.I am quite confused about my test cases : case 1: minimum depth 10m,RDRG2 == 3.0d-03,tide elevation amplitude 30-100cm lower than public quite recognized results.And lower(above30cm) than the tpxo_data I used for forcing. case 2: minimum depth 10m,RDRG2 == 2.5...
by bibi951
Fri Apr 24, 2009 3:50 am
Forum: ROMS Usage
Topic: Help My first application
Replies: 16
Views: 11658

Re: Help My first application

Hello,I have a simple question to ask. I don't quite understand this : In set_tides.F line 434 and below, ! To avoid having two boundary ! points for these arrays, the values of "zeta_west" and "zeta_east" ! are averaged at u-points. # ifdef ADD_FSOBC zeta_west(j)=zeta_west(j)+ &...
by bibi951
Sun Apr 19, 2009 1:15 am
Forum: ROMS Usage
Topic: Help My first application
Replies: 16
Views: 11658

Re: Help My first application

Hi,everyone. I want to use only real tides on the open boundry.So I write this in my .h file /* Basic physics options */ #define UV_ADV #define UV_COR #define UV_VIS2 #define UV_QDRAG #define MIX_S_UV #define SOLVE3D #define NONLIN_EOS #undef SALINITY /* Basic numerics options */ /*#define UV_SADVEC...
by bibi951
Fri Apr 17, 2009 3:08 am
Forum: ROMS Usage
Topic: Help My first application
Replies: 16
Views: 11658

Re: Help My first application

Thanks for the above replies,they are very clear. I get this error message: Minimum barotropic Courant Number = 9.63854617E-03 Maximum barotropic Courant Number = 2.99427149E-01 Maximum Coriolis Courant Number = 1.12416582E-02 GET_NGFLD - tidal period (Min = 4.32000000E+04 Max = 9.29494800E+04) GET_...
by bibi951
Wed Apr 15, 2009 2:07 pm
Forum: ROMS Usage
Topic: Help My first application
Replies: 16
Views: 11658

Help My first application about orientation

Hi,everyone I created my domain grid with seagrid.The first corner(*) is southwest(in real world),so the first edge is south(in real world).But what is the west boundary in Roms Model? Is it the first edge(south in real world)? Or ...? If one boundary is half open,(there is a gap ),I should use OBC ...
by bibi951
Tue Apr 14, 2009 12:46 am
Forum: ROMS Usage
Topic: Help My first application
Replies: 16
Views: 11658

Re: Help My first application

Hi,Kate. I tried Gfortran,it also failed to do it. I have rewrite this section to a explicit do loop. As follows: line 25 : character*2000 fmt1,fmt2,ftmp aroud 176: c output format fmt1='(f9.3,f9.3)' if(APRI)then fmt2='(f8.3,f8.1)' else fmt2='(f8.3,f8.3)' endif aroud 227: if(APRI)then write(11,trim(...
by bibi951
Tue Apr 14, 2009 12:31 am
Forum: ROMS Problems
Topic: annoying error about ntcdf
Replies: 2
Views: 1908

Re: annoying error about ntcdf

Thank you,Kate.
I really appreciate your guide.Thank you.
by bibi951
Mon Apr 13, 2009 11:15 am
Forum: ROMS Problems
Topic: annoying error about ntcdf
Replies: 2
Views: 1908

annoying error about ntcdf

Hi,everyone. I am sorry to bother anyone here.I meet the annoying error again which I met a couple of days ago. I can't find what's wrong, so I hope someone can help me out. This is when I use OTPS for tide simulation. g95 -fno-second-underscore -fleading-underscore -L/usr/local/lib -lnetcdf -I/usr/...
by bibi951
Sun Apr 12, 2009 12:08 pm
Forum: ROMS Usage
Topic: Help My first application
Replies: 16
Views: 11658

Re: Help My first application

Hello,everyone. Back again. I now use OTPS to make tide forcing.I use Cygwin for windows,and G95,Gfortran are my fortran compiler.Now it seem that G95 don't recognize this.Any advice? $ make extract_HC g95 -o extract_HC extract_HC.f subs.f -L/usr/local/lib -lnetcdf -I/usr/local/include In file extra...
by bibi951
Sat Apr 11, 2009 2:30 am
Forum: ROMS Usage
Topic: Help My first application
Replies: 16
Views: 11658

Re: Help My first application

Hi.Thanks for your replies.
I have modified the bathymetre,and it works.
Very nice.
Thank you all
by bibi951
Fri Apr 10, 2009 1:16 pm
Forum: ROMS Usage
Topic: Help My first application
Replies: 16
Views: 11658

Help My first application

Hello,everyone.I am new to Roms. I just have build up my first application program.As I ween,there is something wrong. It is just an imatation of windbasin.I use my grid-The area range is 3-41N,100-137E.I didn't do much preprocess on bathymethy.And I use four wall boundry conditions,surface and bott...
by bibi951
Sat Apr 04, 2009 5:03 am
Forum: ROMS FAQ
Topic: Tidal forcing at the open boundary
Replies: 23
Views: 62430

Re: Tidal forcing at the open boundary

[quote="kate"] Paul Budgell has this code and it is now in my branch of ROMS. [/quote]
Is this shared? If it is,Would you please give me a link to this?
by bibi951
Fri Apr 03, 2009 9:26 am
Forum: ROMS FAQ
Topic: Tidal forcing at the open boundary
Replies: 23
Views: 62430

Re: Tidal forcing at the open boundary

If you have a large enough domain to require the body force potential tide, then that's another story. Paul Budgell has coded it up and it is in my svn branch. You then have to provide the tidal potential everywhere as more input fields. Do you mean that tide can be generated by ROMS by introducing...
by bibi951
Wed Apr 01, 2009 7:58 am
Forum: ROMS Problems
Topic: Some mistakes in Field-preparation package
Replies: 3
Views: 2095

Re: Some mistakes in Field-preparation package

Hi,Kate.I also use matlab . But how can I transform my realistic Forcing data onto my computation grid(curvilinear coordinates ).Do I need to do this myself or ROMS does this job? I have just found a matlab ROMS toolbox.But it seems have few discription files.Can this toolbox give me the right input...
by bibi951
Tue Mar 31, 2009 3:22 am
Forum: ROMS Problems
Topic: Some mistakes in Field-preparation package
Replies: 3
Views: 2095

Some mistakes in Field-preparation package

Hi,I use Field-preparation package released by Hernan G. Arango. I find some small mistakes in Hydro,OA,Forcing,Initialization package. I fix some but I am not sure whether I did the right modification. for examples: OA : def_oa.f 240: status=nf_put_att_text(ncoutid,varid,'units',5,'meter',varid) or...
by bibi951
Mon Mar 30, 2009 6:19 am
Forum: ROMS Problems
Topic: My Error Building OA package
Replies: 3
Views: 2707

Re: My Error Building OA package

Thanks for your guide. I had a try. When use G95 or Gfortran : g95 -DNO_EXIT -g -O2 -I /usr/local/include -L/usr/local/lib -lnetcdf -o /h oamain.o: In function `MAIN_': /home/Sun/roms/oa/oamain.F:268: undefined reference to `nf_put_var1_double__' ... /home/Sun/roms/oa/oamain.F:79: undefined referenc...
by bibi951
Sun Mar 29, 2009 11:09 am
Forum: ROMS Problems
Topic: My Error Building OA package
Replies: 3
Views: 2707

My Error Building OA package

I use Cygwin. When I build OA package.This error occur:detail in the attached file Any suggestion would be appreciated. g77 -c -DNO_EXIT -g -O2 def_oa.F g77 -DNO_EXIT -g -O2 -o /home/Sun/bin/oa oamain.o acor.o asm.o atg.o bcintrp.o bcucof.o caldate.o day_code.o def_oa.o dhlev.o diagn.o down_shift.o ...
by bibi951
Tue Mar 24, 2009 1:41 am
Forum: ROMS Problems
Topic: ERROR running application example of CBLAST
Replies: 14
Views: 6034

Re: ERROR running application example of CBLAST

Oh ,
I use
mpirun -np 4 ocean < ocean.in

not
mpirun -np 4 ocean ocean.in

A silly mistake

:oops:
by bibi951
Tue Mar 24, 2009 1:18 am
Forum: ROMS Problems
Topic: ERROR running application example of CBLAST
Replies: 14
Views: 6034

Re: ERROR running application example of CBLAST

Hi. I now use SGI to run this example cblast in parallel. Its compilation ends with no error.BUT when execute oceanM: MPI: On host a3700, Program /lun/home/lujiuyou/roms/Projects/cblast/Forward/oceanM, Rank 0, Process 32711 received signal SIGSEGV(11) MPI: --------stack traceback------- sh: line 1: ...
by bibi951
Mon Mar 23, 2009 12:06 pm
Forum: ROMS Problems
Topic: ERROR running application example of CBLAST
Replies: 14
Views: 6034

Re: ERROR running application example of CBLAST

Thank you for your replies.
I've just realized having made a simple mistake
qsub a job in a incorrect way on my SGI.Not the problem of this model.
Many Thanks and Best Regards
by bibi951
Mon Mar 23, 2009 5:48 am
Forum: ROMS Problems
Topic: ERROR running application example of CBLAST
Replies: 14
Views: 6034

Re: ERROR running application example of CBLAST

lu@a330:/> ls -l /usr/local/netcdf3.6.2/include/netcdf.mod -rw-r--r-- 1 root root 263985 2007-08-03 11:21 /usr/local/netcdf3.6.2/include/netcdf.mod "cp /usr/local/netcdf3.6.2/include/netcdf.mod" Sorry, I did not complete it with its destinition(Build directory for scratch). My SGI OS is un...
by bibi951
Mon Mar 23, 2009 4:46 am
Forum: ROMS Problems
Topic: ERROR running application example of CBLAST
Replies: 14
Views: 6034

Re: ERROR running application example of CBLAST

I now use SGI to run this model(Serial).But I am not the administrator,and I canot install Cygwin as I wish.So I use SSH (installed) and netcdf(installed). What can I only do is to modify my build_cblast.sh to be adapted to the installed system.So In build_cblast.sh setenv NETCDF_INCDIR /usr/local/n...
by bibi951
Sun Mar 22, 2009 1:10 pm
Forum: ROMS Problems
Topic: ERROR running application example of CBLAST
Replies: 14
Views: 6034

Re: ERROR running application example of CBLAST

First,I would like to thank all your replies. I now use SGI to run this model example cblast in parallel.This error occur: cp: cannot stat `/usr/local/netcdf3.6.2/include/netcdf.mod': No such file or directory make: *** [/lun/home/lujiuyou/roms/Projects/cblast/Forward/Build/netcdf.mod] Error 1 But I...
by bibi951
Sat Mar 21, 2009 12:04 pm
Forum: ROMS Problems
Topic: ERROR running application example of CBLAST
Replies: 14
Views: 6034

Re: ERROR running application example of CBLAST

$ ./oceanS < cblast_stations.in ocean_cblast.in Error: Resolution, Grid 01: 0000x0000x000, Parallel Threads: 1, Tiling: 000x000 ROMS/TOMS: Wrong choice of domain 001 partition or number of parallel threads. NtileI*NtileJ must be a positive multiple of the number of threads. Change number of threads ...
by bibi951
Sat Mar 21, 2009 11:12 am
Forum: ROMS Problems
Topic: ERROR running application example of CBLAST
Replies: 14
Views: 6034

Re: ERROR running application example of CBLAST

HI,I have use : export NETCDF_INCDIR=/usr/local/include export NETCDF_LIBDIR=/usr/local/lib before cd ${MY_ROMS_SRC} in build_cblast.sh script. It also leads to this error mentioned above. But if I use NETCDF_INCDIR ?=/usr/local/include NETCDF_LIBDIR ?=/usr/local/lib in the CYGWIN-g95.mk It can comp...
by bibi951
Fri Mar 20, 2009 12:53 pm
Forum: ROMS Problems
Topic: ERROR running application example of CBLAST
Replies: 14
Views: 6034

ERROR running application example of CBLAST

I am a very beginner of ROMS.When I run the application example of Calast I get this error makefile:233: INCLUDING FILE Compilers/make_macros.mk WHICH CONTAINS APPLICATION-DEPENDENT MAKE DEFINITIONS cp -f /usr/g95soft/netcdf/include/netcdf.mod Build cp: cannot stat `/usr/g95soft/netcdf/include/netcd...
by bibi951
Wed Mar 18, 2009 2:11 pm
Forum: ROMS Installation
Topic: Tutorial: Installing ROMS in Windows XP / Vista (via Cygwin)
Replies: 20
Views: 28231

thank you but which to follow```

thank you very much for the tutorial! i'm new in both ROMS and Unix,so i have to follow step by step the istall instruction. but why this tutorial is different with the one on the wikiROMS at https://www.myroms.org/wiki/index.php/ROMS_Cygwin#Install_Cygwin ? because on that one there are Install dif...