Search found 26 matches

by phamsymt
Wed Nov 22, 2017 2:42 am
Forum: ROMS Discussion
Topic: Flow runs to fast in ideal domain
Replies: 8
Views: 3730

Re: Flow runs to fast in ideal domain

It should be a good comment, since wave only transports energy, not for material as float. However, it raise me a question that, in order to convince the audience how float is transported in right way, it is had better to put figure of flow together. Although transport of float depend on several oth...
by phamsymt
Tue Nov 21, 2017 8:35 am
Forum: ROMS Discussion
Topic: Flow runs to fast in ideal domain
Replies: 8
Views: 3730

Re: Flow runs to fast in ideal domain

I set "undef" for all "FLOAT", "T-PASSIVE" and "SEDIMENT". Also I just ran ROMS alone, not coupling with WRF or SWAN.
by phamsymt
Tue Nov 21, 2017 2:01 am
Forum: ROMS Discussion
Topic: Flow runs to fast in ideal domain
Replies: 8
Views: 3730

Re: Flow runs to fast in ideal domain

It is really nice comment. I reduced depth the surface gravity wave speed decrease a lot.

However, in case I just only want to observe how flow base on the advection transport to other boundary. Could you kindly suggest me how to do that?

Thanks
by phamsymt
Sat Nov 18, 2017 6:15 am
Forum: ROMS Discussion
Topic: Flow runs to fast in ideal domain
Replies: 8
Views: 3730

Re: Flow runs to fast in ideal domain

Thanks for your comment.

The depth of my domain is 160 meter.

The vertical layers are 30. For simplicity, all layers have the same velocity. "no-slip condition was set.

I did not run with tide and all atmospheric forcing were set zeros.
by phamsymt
Fri Nov 17, 2017 8:59 am
Forum: ROMS Discussion
Topic: Flow runs to fast in ideal domain
Replies: 8
Views: 3730

Flow runs to fast in ideal domain

Hello everyone I did for ideal domain size with length of 200km in y, and 200km in x direction. The resolution is 3km x 3km. I put advection (source) at the left boundary with value of 0.4 m/s, while value in the inner domain are 0.1 m/s. Direction of current is only from left to right (u=0.4m/s at ...
by phamsymt
Sat Nov 14, 2015 4:02 am
Forum: ROMS Discussion
Topic: Having problem with temperature and salinity of point source
Replies: 2
Views: 2782

Re: Having problem with temperature and salinity of point so

Thanks Zaser for nice information. That is exact reason why I had error with point source.
by phamsymt
Sat Nov 07, 2015 3:44 am
Forum: ROMS Discussion
Topic: Having problem with temperature and salinity of point source
Replies: 2
Views: 2782

Having problem with temperature and salinity of point source

Dear all, I want to see how temperature and salinity (T-S) transport from the point source. I turned on LtracerSrc == T T T, and putted temperature and salinity in the "river forcing NetCDF" with "river_flafg(river)=3 for whole depth column. The value of temperature and salinity are d...
by phamsymt
Thu Apr 09, 2015 2:57 am
Forum: ROMS Sediment
Topic: Problem during simulating sediment from point source
Replies: 8
Views: 9084

Re: Problem during simulating sediment from point source

Many thanks for your great suggestion on focusing on TS_PSOURCE & UV_PSOURCE. I did turn off LuvSrc (LuvSrc ==F) before. Now, I turn on it, the results seems to be correct. The "sandmass_01" does not increasing anymore with the range just from 1.0e-004 to 4.0e-004. However, I still can...
by phamsymt
Tue Apr 07, 2015 2:29 pm
Forum: ROMS Sediment
Topic: Problem during simulating sediment from point source
Replies: 8
Views: 9084

Re: Problem during simulating sediment from point source

The flow rate is 0.01 m3/s. In my problem, the sediment concentration is quite high because it is released from mining activity. We may have 3 scenarios of releasing sediment from that with respect to the depth of release (at the surface (70m), middle (30m) or bottom). The location of sediment relea...
by phamsymt
Tue Apr 07, 2015 8:09 am
Forum: ROMS Sediment
Topic: Problem during simulating sediment from point source
Replies: 8
Views: 9084

Re: Problem during simulating sediment from point source

I am so sorry for keep you waiting so long, because I was out of the office. I implemented the point source as a 1 river source. In order to constrain it stops after first 24 hours, I set the runoff equate 0 after first 24 hours. In addition, to release sediment at surface I only gave the value at l...
by phamsymt
Thu Apr 02, 2015 5:45 am
Forum: ROMS Sediment
Topic: Problem during simulating sediment from point source
Replies: 8
Views: 9084

Problem during simulating sediment from point source

Hi. I simulated sand_01 transport from a point source (released only 24 hour) at the surface layer (25 layers with average depth around 70 m), sand_01 concentration of point source is 70 kg/m3, water discharge is 0.01 m3/s horizontal resolution in 6x6 km. Some other parameters in sediment.in as foll...
by phamsymt
Wed Dec 31, 2014 9:14 am
Forum: ROMS Bugs
Topic: ROMS & SWAN coupling: Subscript out of range for array depth
Replies: 2
Views: 2957

Re: ROMS & SWAN coupling: Subscript out of range for array d

Haizz. It is my mistake. I had typo in file "swan.in". The number "27" in line "INPGRID BOTTOM CURVILINEAR 0 0 156 27 EXC 9.999000e+003" must be replaced by 117 (it is horizontal grid point). Therefore, ROMS showed error with the "upper bound=28". I am so sorr...
by phamsymt
Tue Dec 30, 2014 1:06 am
Forum: ROMS Sediment
Topic: unable to find requested variable
Replies: 9
Views: 13794

Re: unable to find requested variable

Thanks for your nice explanation, Zafer. It clearly makes sense to me
by phamsymt
Mon Dec 29, 2014 1:53 am
Forum: ROMS Bugs
Topic: ROMS & SWAN coupling: Subscript out of range for array depth
Replies: 2
Views: 2957

ROMS & SWAN coupling: Subscript out of range for array depth

Dear ROMS users I ran coupling ROMS with SWAN. It gave me following errors: " NL ROMS/TOMS: started time-stepping: (Grid: 01 TimeSteps: 00351361 - 00047520) GET_NGFLD - temperature western boundary condition, t = 244 12:00:00 (Rec=0000003, Index=1, File: roms_bry_eez_09.nc) (Tmin= 242.5000 Tmax...
by phamsymt
Fri Dec 26, 2014 6:14 am
Forum: ROMS Sediment
Topic: unable to find requested variable
Replies: 9
Views: 13794

Re: unable to find requested variable

Many thanks for your nice comments, Kate and Zafer. They help me understand a lot. My original aim is simply to simulate the sediment transport and tracking dye. However, ROMS gave me some error on requested variables including mud_01_sflux, sand_01_sflux and dye_01_sflux in the forcing file. Theref...
by phamsymt
Tue Dec 23, 2014 3:22 pm
Forum: ROMS Sediment
Topic: unable to find requested variable
Replies: 9
Views: 13794

Re: unable to find requested variable

As following the above error. I ran ROMS with USE_DEBUG. It gave me the following error (please see more detail in file "ocean_basin.log" : " GET_2DFLD - dye concentration, type 01, surface flux, t = 245 04:59:57 (Rec=0000126, Index=1, File: roms_frc_eez_09.nc) (Tmin= 240.0000 Tmax= 2...
by phamsymt
Fri Dec 19, 2014 3:56 pm
Forum: ROMS Sediment
Topic: unable to find requested variable
Replies: 9
Views: 13794

Re: unable to find requested variable

It is right. I provided mud_01_sflux & sand_01_sflux in 2D. However, if I provide them in 3D (mud_01_sflux(ocean_time,s_rho,eta_rho,xi_rho). Please see the attached files "create_forcing.m". ROMS showed error as " - error while reading variable: mud_01_sflux at TIME index= ... ......
by phamsymt
Fri Dec 19, 2014 2:22 am
Forum: ROMS Sediment
Topic: unable to find requested variable
Replies: 9
Views: 13794

unable to find requested variable

Dear Guys I switch on Sediment with only "define SUSPLOAD". ROMS asked me to provide mud_01_sflux & sand_01_sflux in forcing files. However, after providing them, ROMS gives me the error report " INQUIRE - unable to find requested variable: in files roms_blk.nc and roms_frc.nc&quo...
by phamsymt
Fri Dec 19, 2014 1:50 am
Forum: ROMS Discussion
Topic: Change the unit of x_rho from "meter" to "degree"
Replies: 5
Views: 2604

Re: Change the unit of x_rho from "meter" to "degree"

Thank you very much for your useful comment. It work now
by phamsymt
Tue Dec 16, 2014 8:31 am
Forum: ROMS Discussion
Topic: Change the unit of x_rho from "meter" to "degree"
Replies: 5
Views: 2604

Re: Change the unit of x_rho from "meter" to "degree"

Dear Guys, I still get problem with changing the coordinate 1. I set spherical to be True in /Functionals/ana_grid.h. The x_rho & y_rho changed to lon_rho & lat_rho but zero value in roms_avg.nc & roms_his.nc. 2. In the gird file I always set spherical to True. However, the x_rho & y...
by phamsymt
Tue Dec 16, 2014 7:19 am
Forum: ROMS Discussion
Topic: Change the unit of x_rho from "meter" to "degree"
Replies: 5
Views: 2604

Re: Change the unit of x_rho from "meter" to "degree"

Great comment. It done

Thank you very much
by phamsymt
Tue Dec 16, 2014 6:25 am
Forum: ROMS Discussion
Topic: Change the unit of x_rho from "meter" to "degree"
Replies: 5
Views: 2604

Change the unit of x_rho from "meter" to "degree"

Dear Guys,

Could anyone tell me how to change the unit of x_rho and y_rho from "meter" to "degree" in output files of ROMS "ocean_avg.nc and ocean_his.nc" ?

Thank you very much

PV-Sy
by phamsymt
Mon Oct 10, 2011 9:52 am
Forum: ROMS Problems
Topic: make_grid error
Replies: 2
Views: 3190

Re: make_grid error

Thank You for your advice,

I have solved my problem by using old Preprocessing_tool package. I do not understand why. hic

Thank you very much
by phamsymt
Thu Oct 06, 2011 2:55 pm
Forum: ROMS Problems
Topic: make_grid error
Replies: 2
Views: 3190

make_grid error

Dear all I am trying to create file roms_grd.nc with Matlab2010a, mexcdf.r3776, and romstools_param.m (in attached file. However, I get error showing as below: .................. Compute the metrics... Min dx=16.34 km - Max dx=18.5221 km Min dy=16.3735 km - Max dy=18.5221 km Fill the grid file... Ad...
by phamsymt
Fri Jul 01, 2011 4:19 am
Forum: ROMS Installation
Topic: pgf90-Error-Unknown switch: -M/opt/netcdf4/lib
Replies: 2
Views: 3253

Re: pgf90-Error-Unknown switch: -M/opt/netcdf4/lib

I greatly appreciate for your help.

As you mention, I replaced -M with -L in the flibs variable. Now it is compiled without any errors

Thank you very much
by phamsymt
Tue Jun 28, 2011 1:15 am
Forum: ROMS Installation
Topic: pgf90-Error-Unknown switch: -M/opt/netcdf4/lib
Replies: 2
Views: 3253

pgf90-Error-Unknown switch: -M/opt/netcdf4/lib

Hello, I am trying to build ROMS v3.4 with pgi10.6 and netcdf-4.1-beta2 on UBUNTU 10.10. I met an error as following: ...................... cp -p /home/dhson/make_macros.mk Build makefile:234: INCLUDING FILE Build/make_macros.mk WHICH CONTAINS APPLICATION-DEPENDENT MAKE DEFINITIONS /opt/pgi/linux86...